Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Randy's latest activity
-
RRandy replied to the thread Has anyone done a 5CP bearing replacment?.That's what I do Greg. When a pump crankcase goes bad I don't bother with changing the bearings or the rods I swap out the crankcase...
-
RRandy reacted to Greg Pack's post in the thread Has anyone done a 5CP bearing replacment? with
Like.
For those interested in the pump body replacement here’s what I got. I think it was about $370, about half the cost of a new pump. If... -
RI've had a number of conversations over the last few years with people who've bought old, antiquated washes and have no clue what...
-
RRandy replied to the thread LED7 V7.30 and Nayax count up.You know you can send your LED-7 v7.30 Timers into Dixmor and have them upgraded to a v7.36. There is a $30 fee for this timer version...
-
RRandy replied to the thread Flojet Conversion.Flo Jet G57 pumps are a good pump for foam brush. For Presoak and Tire cleaner I'd go with a Procon pump controlled with by MX-8...
-
RRandy replied to the thread Flojet air pump signs of going bad.It takes me about 2 minutes to change a Flo Jet pump. I have a ball valve on my chemical tank that I close and a ball valve on my air...
-
RRandy replied to the thread Bubble Brush runs even with machine off.Take apart the solenoid valve you probably have some debris under the seat inside the valve.
-
RJust curious how powering the bay down in the winter triggers the weep system? I have individual switches on my LED 7's and a ball valve...
-
RRandy replied to the thread Belt Drive Removal.Do what Pat has said and run a tap into the holes, you don't want to strip out the treads in the hub. Before you try pushing the sheave...
-
RRandy replied to the thread Crazy customer - now what?.That's why we always turn off the power to the bays when we close down the bays during freezing weather, keep the dumb public out the wash.
-
RRandy replied to the thread ACW-4 retrofit for Nayax.By removing the regulator it increases to voltage to the display. The Red Cyrytopay display also has a library of words built into it...
-
RRandy replied to the thread ACW-4 retrofit for Nayax.When you install Cryptopay on a ACW-4/5 controller you cut off the 5 volt regulator from the board and install a jumper around around...
-
RRandy replied to the thread Liftmaster/chamberlain operator limits model tvrfc5z5.Try calling Liftmaster commercial at 800-528-6563. A opener that old might not be supported anymore.
-
RRandy replied to the thread Mars validators.They'll work. What kind of timers are you using? If your using a Dixmor change the setting on the dollar bill side.
-
RRandy replied to the thread Nayax MDB to Pulse Isolator.Yes it does.
