Search results

I have Coinless installed at both locations, which is basically an app for our wash. Works great!

I currently have an HP pass right after the presoaks, then another after the TF, but the 2nd HP pass was only because a medium pass wasn't enough to wash all of the TF off. If I apply TF first, I would still follow with an HP pass after the presoaks and TF. I made a change and only offer TF on...

I'm assuming you mean that dwell time is increasing, but that's a good thing? I currently apply low then Hi. Hi is setup to be stronger and go through the low. Would keeping it that way not work?

I was reading a thread on Facebook that brought up an interesting idea and I wanted to get your thoughts on it. The idea was to apply Triple Foam after the 2 presoaks, then rinse them off together. Currently I apply 1st presoak, dwell, 2nd presoak, dwell, HP rinse, TF, then another HP rinse...

No, but installed Coinless at both locations to help. Adoption has been slow, but somewhat steady. Nothing like the adoption of in-bay cc readers. That adoption curve was way higher.

FNF wax is blue, but I've also used Red. One supplier only carries red, the other blue. I'm happy with the foaming and smell of their TF Jazz products. Go a long way too. I've use the 200 series Hi PH on the Razor and also the Action 100 series, both are similar, can't get them dialed in...

I emptied the chemical tank, put in a larger tip and refilled it worked perfectly after that. Still doesn't make sense why no liquid when air was turned down. I first tested the pump. Chemical came out strong. Looked in the tank. It was green. Then adjusted air and chemical over and over...

Warsaw for the most part, JBS for the touch free Hi and Low PH

that's been my experience too, and why it took me forever to figure out the issue. It just didn't make sense when it wasn't pump. I actually turned my air all the way off and still no chemical came out. Usually doing that should produce liquid only.

I did the same as you when I used winter soap. I would switch tips based on temperature. Problem was that I would also have to drain the tank and run FB in every bay to get all old chemical out, or it would be pointless or freeze. Eventually I got tired of it and installed weep for TF and FB...

I just had this same exact issue and thought it was the pump. but it was outputting fine. That is where you should start and it's easy to check. My issue turned out to be the TC was not strong enough. KleenRite had accidently sent me some that wasn't concentrated, so when I put in a new pail...

It's just called "Rain Bar Style". Mr. Foamer actually sells two different versions for their product for those that add it on to a machine. They have a lava curtain style and a rain bar style. I went back and forth with Washworld for so long trying to figure out how to get this, and they...

I had the same thing done on my Razor, but's in not as strong and nice as the Profile FNF. Really love how it turned out, so much better than a curtain that is unreliable. My distributer said that after I had my Razor done that way, they have been doing the same at all other installs. I got...

Thanks! I took a few pics and these reallys stood out for that reason. They are also what I sent to WashWorld.

It's just FNF, but will less air and the shield bent out of the way. I do have the touchless scrubbers. Do a decent job so far. Tomorrow we will do more testing/tweaks and I'll take more pictures.

I mix the KR stuff 2/1 or 3/1 but not more. Seems to be ok in most temps.

I have Unitec Portals. I'll have to look up %'s but it's not very high. Just something that I offer that doesn't cost me anything and adds to my $ average per car. Here is a sample, it's from the last 10 days:

I had those issues with the older models and got rid of them all.