Search results

When you changed out the X12 did you use the new wiring harness, or did you gust unplug the plug on the circuit board? If you used the wiring harness, make sure it is wired like the LES6 drawing. If you have a plug between the X12 and LED6 check the connections.

Thanks for the info!!

If the unloader is not responding fast enough the pressure could be spiking as well. This could overload the pump and motor and the squealing can be the belts, NP flowing through the unloader or a motor bearing. Just a direction to look.

Not sure what is involved doing PM just not done any. However, I have 2 machine available new and one demo. you can email me at coffee4mo1950@yahoo.com and we can discuss the details. maybe the price is right for S LA as I am in S AR.

Looking at the building it appears you only have a 8' wide on the EQUIPMENT ROOM . That probably will be a little small for all the equipment required for a 4 & 1 Touch-less IBA. What is your water line size, 1.5" hopefully. What size of electrical panel / service is at this location?

It is simple. The raw materials ( components, Labor, Insurance, Corp Profits , Government) are not economically available in the US.

Car Wash Man is correct. Find a local company that can install and service your first machine so you can get to know what is needed and help you be successful.

"I was thinking of daisy chaining several of these on both sides of the tunnel: https://www.amazon.com/Landscapesta...g-Projects/dp/B0CBJWMB4J?ref_=ast_sto_dp&th=1 Looks like an American company based in NC, and not made in China (https://landscapestation.com)." The Amazon link you provided...

Pulsation Hose, 2 Ft. | Hypro Pentair | 3375-0012 (kleen-ritecorp.com) This is what I have switched to as the others went out. Only $27.55 each

Post a picture of your auto. Someone here should be able to ID it.

When you check out the link you will see they are made in China. You just have a US importer and maybe some tech support. It might be worth a try, hope the LED's are brighter that the ones we have in the automatic i have seen in the field.

I would suggest that you ask your tunnel supply to upgrade the LED's to Higher output or double up on them

$35,000.00 looks too low for a china made unit. What about the tariff and inbound shipping? Should that be closer to $50,000.00 landed at job site??

There are several factors required to give you a swag estimate. First is type of IBA (Touchless or Brush), lot size, traffic count, trade area population area of the country, water quality, Are you looking at Membership -Type of pay-station , Number of vacuums (free or pay). all of this goes...

If you also have Coleman meters you may have to get replacement doors. I would think that credit card readers will bring in more profit than bill acceptors. and defiantly be less Maintenace.

Just another though. Does the brush run on any other function besides rinse, while the bay is running or not running? If yes then it is a stuck soap valve, if not it is a shorted wire issue related to the Rinse valve and brush valve. Have you checked to see if the rinse valve is energized when...

Hope this helps- Coleman phone # 1-713-683-9878

I remember Tom Hoffman jr. many years ago at an ICA seminar stat the best way he found to get his customers to pickup behind themself was to increase pricing, offer more services and add lighting . This way he was the highest price wash in town. He was able to get rid of the buck washers and...

Sounds like the early days of self service. Just go by and collect your quarters No maintenance required. HA HA!!!

Keno is properly correct, however if that does not fix the issue check your rotary switch to see if a wire is touching between the Brush and Rinse terminals. Also check the terminal switch as well.