Search results

IDX is gone , that is correct. However, Kleen Rite owns the marking rights for most of IDX products as they are purchasing from the engineering company that made the products or IDX . If you need a replacement Big Time you can purchase a replacement circuit board, Do you know the exact model of...

Reminds me of Specialty or AOK. As both are gone now.

Looks like you have a short on the count up wire from crypto pay to the timer

Think about it. soft soap solution is only a very small percentage of the water going through a pump 7- 8 ounces with 3 to 4 gallons per minute. That small amount of soft chemical solution is not going to help cleaning if you have truly hard water. If you are only talking low pressure presoak /...

The Red/Green is coin pulse wire, 3 wire from the outside in. The Timed hot wire is White , the last wire on the LTT802 in the middle of the timer and it is tied to the input of your rotary switch. The information is on the label . Hope this helps.

I do not use the Dixmor timer but you should be seeing 6-8 + years out of them. First is check your voltage in ever meter box with nothing running in any bay it should be between 23-28 VAC. Next turn on several bays at one time select the same function in each bay check voltage again. it should...

To help you we need to know what you mean by hard water. 15-20 GRAINS/ 21-25 GRAINS/ or harder. then what is the max / peak flow rate if all 8 pumps were running hi pressure 4-5 GPM per pump. 35-40 GPM and you add an RO you would be looking at an additional 5-8 GPM depending on size so you could...

Check the coin acceptor connection. Red/Green wire on timer it has a built-in coin switch short. If you remove the coin acceptor,, bill validator and any thing else connect to the coin wire at the timer it should start to scroll again the welcome message and coins to start.

You do not need Air to operate the pump like FloJet ARO and others. Dosatron is water driven. You do need air to make the foam though. KR is a parts catalog house, not that good on a lot of tech suport.

Yes Nayax can send pulses to the AT411 Just parallel the coin acceptor the nayax coin pulse should be on timer coin plus positive.

If you are doing count down just tie to the coin pulse line . However if you are doing Count up the ltt 802 timer might not see the siginal . The LTT802 has not been mfg in about 15 years now The GT200 from Kleen-Rite is a drop in replacement and it will count up as the credit card is working...

please send photo's

I am in favor of induvial lighted push buttons verse button in a strip. That way you can replace only 1 button if it is damaged. AS for rotary switches the standard 8 position electro or shellco switch hard to beet. As for 12 position rotary buy the bigger one as it out last every thing the...

Several c-stores, fast food and pharmacies, locations in central AR show Tap but it is not turned on Mag strip or chip only

No all of the controls are manufactured in AR by DWS. The "IL" uses a China made gantry. The Tidal Wave models are built in AR. DWS offers your choice of HP pumps Giant or Cat and tankless chemical injection,

Both of those machines are nice and pricy. I would look at the "IL" similar to the 360 at Dynamic Wash Soultions. I believe it comes standard with onboard dryer. They are in booth 543 if you are still at the show. They also have 2 other IBA's that wash faster if speed is what you want, both...

OK boys this is no place to call all of the kettles Black. Even if Dan is correct.(y)

Contact Etowah Valley and ask for David Lang. David was with Carolina Pride for years he may be able to help.

Dan's right. There ae a lot of red flags looking at that old pump stand. Hope you are very mechanically incline or you are a fast learner, as I see a lot of leaks that need to be address as soon as you take the wash over. You need to make the wash more appealing to draw more customers in like...

What are your wash cycles and pricing? What model of IBA are you washing with?