Search results

Probably get better response if you post a picture and/or part number you are looking for

The 3 main contenders are nayax, cryptopay, and money. All have positives and negatives, you'll have to do your research, as HeyVern said there are many threads on here about it already

I believe external stop buttons are necessary with count up, and are a big factor on how successful count up is at a wash

We use the metal ones, but the paint does flake off before the brush wears out a lot of the time on the hog daddy. Hog king we use metal also, no issues with paint on those. Both get good life, better than we got with Erie. Foaming pattern is not as good as Erie, but still gets nice and foamy.

Wow - 200 heads per year and they can't be bothered...we have had issues with Erie heads also and moved away from them about a year or 2 ago to hog daddy and hog king brushes. Both have worked well for us. On another note - bravo to you for needing 200 brush heads a year! That's some wash volume!

Count up works fine on nayax with the external stop button. Maybe the problem is monex if you can't setup the readers the way you want.

Thats the beauty of it, Amazon (and many others) will "rent" you their servers to use at a very affordable rate. So Hamilton would be getting super reliability at a very reasonable cost.

Sure they do, when they break down

They can't control how long internet is out with an outside provider, but a company of that size that is hosting solutions for their customers should have at least one backup internet connection and probably more. A better solution, they should probably be using offsite servers for their hosted...

You have some good starting points to start your troubleshooting between the 2 threads you are asking the exact same thing in.

Better yet, tell him to come out to your wash and fix the issue

yes, we have 3 bays on original 20 year old 3 hp motors with 5cp pumps. works fine.

Hard water will effect how much chemical is needed to foam and look good. Your chemical supplier should be testing all of this and setting up your chemicals for you. That is one of the main purposes of using a local, knowledgeable chemical rep. If your current supplier is not doing this, you...

Dilution on jug is usually a good starting point. Red is way too big of the jug says that. This is probably the best place to start

There are way too many factors, no one on the internet is going to be able to tell you which tip to use. You can probably get a starting point if you say the exact chemical you are using. If you are using a chemical supplier, they should be dialing this in for you. Red tip is like 20:1, and you...

You went from red to purple? That's a huge jump. Are you getting air to mix with the chemical mix, sounds like you are missing the air

So you have continuous full flow before the solenoid and low flow after a short period of time after the solenoid? Both with and without the guts in the solenoid? I'm trying to follow where you are having full flow and where it is dropping off after some time. Maybe worth putting inline pressure...

I just ordered some security tokens from them, they are still around. 800-488-2646

Other option is to mount rubber door stopper/bumper onto the wall where the boom rests, that works well also.

Could also be a partially collapsed or kinked hose that's not easily detected from outer visual inspection.