Search results

I purchased a 4k system from backstreet surveillance. Periodically, when I try to remotely view what is happening at the carwash it shows the system offline. The only way I have found to correct this problem is to reboot the NVR. Any ideas on how to solve this? Anybody else experience this.?

I have an IVS vacuum that has a round lock on the coin box. I have no key and need to remove it. thanks

Measured the current flow for each function. Current flowed ranged from approximately 800ma to 2.4 amps. Interestingly, the highest current flow was associated with my low pressure functions which used Allenair solenoids (liquid & air). The one exception was my triple shine unit which uses GC...

How would I identify that? I only see 24vac to the motor starter coil. The heater portion consist of 3 screw in coils (one for each phase) that react to excess current. Seems to be a mechanical trip.

Is it acceptable to use 22g stranded wire from the meter boxes to the equipment room? I have access to Belden 8458 (15 conductors) stranded wire from someone in the business. He got it from IDX some time ago. When I spoke to IDX they told me one of the reasons they sold it was because in the...

Installing Led 9 on bay wall and trying to minimize wires to the timer. For the Dixmor LED9, is the connection between the timer and Microcoin QL a 4 wire connection or 3 wire connection. For 4 wire coin acceptor connections (Sensatron), besides power and common, there are two signal (coin...

I ordered a couple to try out but they look completely different than what is shown on KR's website. The ones I received have a red plastic body and the control door doesn't appear to swing open to easily clear jams. The picture on KR's website a stainless steel body/frame. Did I get the wrong...

I ordered a couple to try out but they look completely different than what is shown on KR's website. The ones I received have a red plastic body and the control door doesn't appear to swing open to easily clear jams. The picture on KR's website a stainless steel body/frame. Did I get the wrong...

Mep, what size and make are the connectors on the terminal block?

Was thinking about trying out some icoin acceptors. Read somewhere else on the forum that they had issues with the acceptor losing its programming. Is this still an issue? Any experience/opinions regarding this acceptor?

Mep, what spade connector are you using for the terminal block?

Any ideas on how to mount a Dixmor horn. Don’t want to leave it dangling in the meter box. thanks

I'm rewiring some meter boxes and was wondering what is the correct size (width) spade connector for an electroswitch? The ones at the local box store were too wide. I probably need to order them. Any preferred brand or part number? Will be using 18 gauge stranded wire.

Perhaps I'm missing something here. What would be the drawback of installing the Crytopay swiper with the button on the vacuum? What is the advantage of installing the swiper without the button on the vacuum?

I have small coin boxes that measure 6 inches wide by 11 inches tall. To accommodate the Crytopay card reader, I was planning on mounting the display timer on the wall above the meter box and having new faceplates made. The box is recessed into the wall approximately 3 inches. What would be...

What internet service speed would be best so that I could monitor my car wash remotely. Is cable any better than DSL? Anything I need to look out for? Thanks

I have the option to mount cameras on my light poles or in each bay. From experience, would it better to mount the cameras on the perimeter light poles on in the bays? One of my concerns about mounting cameras in the bays is that the lens will frequently need cleaning. Additionally, if I do...

Did you buy the optional junction box from lorex and mount that to the pole first? The reason I'm asking is that the wires will be external to the pole and I will use a guy wire to support them to the building.

I thought about doing that but the camera base is 4.8 inches wide and the square mounting pole width is 4 inches. Any creative ideas?

Getting ready to install some Lorex LNE8974 series dome cameras on a 4 inch pole. Was looking on the Lorex website and cannot find a goose-neck style mount. The idea is to avoid mounting the camera directly to the pole. looking for some type of mount that lets me mount the camera horizontally...