Search results

Tsys.com is who I use. Not sure if they are approved for Unitec.

Maybe this is old news but my Distributor just told me that NCS is closing Carolina Pride. CP had been their SS equipment company since Ryko got out of the SS business.

I am not planning on going to show this year.

Put a large glue rat trap in where they fly. It will capture them when they get on it then just throw them away.

My Ryko overhead gantry runs 3 one hp electric motors run on 3 phase power. 1 cable tuns through the boom with 10 heavy wires to feed the motors power. If one of the wires breaks we loose a motor function. Rather than buy a long new 10 wire cord that is never available locally we buy a heavy...

I have used aluminum dryer vent sections held on with large hose clamps in the past to make a repair. You can double them up if needed.

I always use Meguiars Hyper Dressing. dilute 1 to 1 for a shiny finish and up to 4 to 1 for a satin finish. One product covers all the sheens people want. It is what I use on Mercedes.

Heavy mud and recreation area also. We are coming out of a long very snowy winter here so everyday we clean each bay 3 or 4 times a day. They seldom clean up after themselves and then bitch about our prices being to high. I can'i say too much to them because I am one of those a good 4x4 adventure.

With the hinged door make sure that it completely closes after opening. Sometimes they may stick open 1/16th of a inch or so, you can usually wiggle it completely shut. When they first came out years ago the quarter sensitivity was set to tight. I found that if a quarter was set on some cold...

I am using the same Kleenrite valve that Earl W. mentioned earlier in the thread.

I have never had a problem like this with any secure coin mech over the last 20 years of using them. It sometimes helps to unhook the power wire for a while then start over. Did you get the programming sheet included with the mech?

I like to use the Cummins Jet scan dual pocket. It will count and sort as well as face and orient the bills. Run the %1s first then you have all the 5,10, and $20s together. Much faster in the long run than just getting a single pocket machine.

Betson enterprises may have what you need.

I was with Nationwide for over 10 years and never had a claim. They came in last year with a huge increase. My agent got a quote from Auto Owners and it was several thousands less than the previous price I was paying.

What circuit breaker is tripping? A 24 coil can draw too much and shut it down but you really need to be more specific on breakers. It has several breakers. If you watch the wash cycle you can kind of narrow it down just on what is being called for at the time it trips.

I like a 15 degree nozzle also and use 1508s, For every 25% more water you double the impingement at the same given pressure. A narrower nozzle will focus the impact better and keep its impingement farther from the tip.

On a similar theme more people are using credit cards and fewer actually get change anymore. I bet half of my quarters from change machines are now for people who show up just to get change and leave. Many come after hours and get change for large bills. Last night at 11 PM I got a call that...

Rivnuts corrode and won't come loose in a wet environment. Put anti seize on the bolt when putting them in will help alot. I buy reusable plastic push pin rivets to replace the Rivnuts after I bring them out. Rocky mountain ATV sells them in 10 packs and work in the existing hole once the...

I have never had a problem with KR but I do occasionally use Dultmeier Sales and they have also been good.

You should check the flow rate needed. I have to have at least 11 gpm for my automatic high pressure functions and most tankless units won't supply that much flow.