Search results

Dralco used to make a rack that was 3 umps high. I don't know who sells them, they don't sell direct to the end user.

It's a joke from another post.

No, but you're talking about $800 vs $180. That's a lot of gay porn.

Indignant?

I use the 1/8" KIP solenoids with a Procon set at 250 PSI, but the bigger GC valves at about 170 PSI gives about the same thing in the bay.

And the guy has a drivers license...

Only if you have the coin and bill acceptors connected together. Dixmor timers have a secondary input for bills, so if you use that, CryptoPay won't see it.

Do you have a plan for actually carrying this out?

The 3M adhesive cleaner is the second best stuff I've used. I don't know what's in the cheap lemon Pledge, but it works a lot better, and it doesn't dry. The sharpened paint tool is just flexible enough that it keeps the edge really flat scraping horizontally. It just took a quick wipe down...

I had a guy who I watched stick the wand in his trailer's stake post, then got in his truck and drove off. Ripped the welded fitting completely out of the boom. I didn't even say anything, but I wasn't happy because of his stupidity. He refused to give me his ID and insurance, and when I...

These were 20 years old and some were original with contact cement. Heat won't loosen that, I've tried. The Lemon Pledge worked much easier than Goof Off, which I've also tried, and was a lot les messy. The best trick was the 6-in-1 painter's tool which was way stronger than a razor scraper. I...

This one works, you have to use a reducing nipple and a 1/8" NPT fitting on the outlet. Rated 250 PSI M.O.P.D. https://www.kleen-ritecorp.com/p-1850-kip-valves-2x1138-24-60-normally-closed-stainless-steel-solenoid-24v-1-8-in-ports.aspx These are much better, full 3/8" pipe flow...

I have, they were all splayed really bad after two months. I stick with nylon anywhere they get abused.

What validator is in it? Did you ever find a dial for your safes?

Fragramatics has a nice stainless bracket for mounting them on the side of a vacuum.

Were you expecting a boyfriend?

https://www.carwashforum.com/threads/safe-combination-dial.20949/

She figured out a really good way to get the old ones off. Still had to use a grinder and wire wheel to remove the bulk, which is messy but is really fast, then she used a cheap dollar store version of Lemon Pledge and sprayed it down. She let it soak a good ten minutes, then used a 6-in-1...

This was one of my worst. Woman was in a bay on a busy day taking her time cleaning trash out of her car. At least she put it in a trash can. Then had the nerve to ask me for money to wash her car. She ended up asking another customer for the startup amount and just rinsed it. She wasn't...

This is why no one uses your presoak. It doesn't clean.