Search results

No. They are count up on my property. They will run on bays or vacuums until the programmed time limit or the customer stops them. On the automatic they will work on any car wash. I don't use many of them, mainly for promotional/gift purposes. If a customer has a credit card I just prefer to...

Yes, whatever your max is set at is what the customer can get

Underperformer. Price is way too high. Express tunnels are selling for 8-10X EBITDA and are much less hassle that a full serve site with detailing& Lube.

Make sure you have good signal from swipers to coordinator. Cryptopay has recommended a couple of inexpensive antennas you can buy on Amazon to possibly help. If you’ve done that and you’re still seeing that problem it’s time to start looking at a potential problem with the problems mentioned...

https://colemanhanna.com/wp-content/uploads/2018/01/RO-SelfServe.pdf

That error can be a little more challenging to solve . I don’t know how it knows the difference but the cables have to be on the correct proximity switch. If you don’t have both proximity switches properly spaced between the moving targets you can get multiple error codes . Too close and they...

Sounds like you'll be physically capable soon. Once you get things under control a SS only wash can be pretty simple and not require too much time. It really depends on the volume of the wash. With daily cleanup help I'd budget ten hours per week after you've gotten a handle on things...

I don't know if they could do that. In the past I have just had agreements with the other parties that any net credit card funds collected after the closing date would be turned over to the buyer.

Kleen rite sells both the parker crimp fittings and another brand . I've used the wrong fitting with the parker crimp and have had to make some alterations to the process to get the crimp to hold. I had to use the proper size crimp dye to get the crimp started and then use the smaller size...

I did this a few years ago and it was pretty simple if I recall. You've got to contact crytopay and tell them you're buying and establish a Worldpay merchant account. The seller needs to fill out a form from cryptopay that says he transfers the site to you. I'd start the process- about two...

A decision needs to be made as to what business model is being pursued here. Hanna back in the 90s had some very short tunnel packages made for C-stores, and this might be one of those sites.

look on YouTube. It's not secret that the low security abus are easy to drill. I think I drilled one many years ago and it opened in less than 30 seconds.

I'd give it a shot.

Yeah, a simple hose/pipe cutter would take a comfort hose in two seconds. I've got them on nine bays for at least a couple of years and haven't had one stolen yet. Would hate that, my trigger setup is pretty pricey.

I have a water wizard with a posted 7' (84") clearance bar and I can wash a super duty sized 4WDs and Hummers when they come through. I can't wash extended height vans but I think everything else that comes from a factory fits through. I would think 88" would be plenty.

depends on the membrane but most run at 175-200 psi. There are low energy membranes that work at around 100 psi

I tried to do a conversion to an old tunnel in the mid 2000s from a tunnel that did a lot of prep work to the new express format. Admittedly that concept was new but the customers did not like it. We were putting out a good overall car but the customers wanted the old system of customers...

I like my mosmatic comfort hoses but they are not a good candidate for ghetto washes. They can easily be cut. Also they can be "skinned" if ran over by a vehicle. But the user experience is far better than the heavy 3/8" wire braid hoses. 1/4" wire braid may be a good option for those with...

Ive heard of some having luck with superglue and the broken key but it sounds like you don't have that. If it's a low security abus lock they can be drilled pretty easily, so easy that it's scary

Start with checking your current spot free. Check the TDS in your tap as well as the RO tank and also water feed hardness and chlorine at the test port located under the broken pressure gauge (which also needs to be replaced). Before you change membrane the feed water should be soft (ideally...