Search results

What if you just want to shut down some of the bays? Are you just turning off the ball valve for the weep to the bays that you want to keep running? I don't think I would shut everything down, just some of the bays.

It seemed to sound the same and fill at a similar rate, so hopefully it's all good. I went ahead and ordered a spare CV and Pressure switch just to have on hand.

Well I should have listened to my original instincts. Had a 3/4" male/female in my cart, but had second thoughts and bought the male/male. Turns out what I had was male/female with an adapter. Almost bought both so I could return one, but o well. Luckily I was able to take the removable parts...

I've had the same exact issue and you only notice in the winter since the weep is low pressure. I had good luck with Fluid Control CV's, but then had a batch that all leaked. I've since used the one's from KR that 2biz posted and so far so good. I have them on top of each boom to inject air...

It does have a nut that attaches the tube from the pump. I thought the CV had a fitting in it, but hadn't realized there were male/male versions, so I just bought this: https://www.zoro.com/cdi-control-devices-valve-check-34x34in-c7575-1ep/i/G0266007/

I found the manual, but it only references the motor etc. and nothing about the tank. It is 3/4" and looks like it's female on top with a male/male adapter.

I actually care and take pride in my washes.

Thanks for all of the information and help. Makes sense now. Haven't really done much to the compressor other than change the oil and filter occasionally. Where is the best place to get a check valve for the tank?

I'm pretty sure it does quit leaking when the tank runs. Where is the check valve?

Perfect. Thanks for the quick response. I will by the one from Supplyhouse as it is cheapest. Might as well buy 2.

Here is the cover of what I think is a pressure switch. Also a picture of the plate on the compressor. I found this:https://www.zoro.com/square-d-pressure-switch-dpst-135175psi-14mnpt-9013fhg49j59x/i/G0257984/ Would that work? I think what I have is set at 175. Or this one...

The pressure switch on my Curtis 5HP compressor is constantly leaking air. Usually after it cycles, the air will run for a few seconds out of the hole in the nut that attaches to the pressure switch and then it stops, but now it is constantly running and getting worse. Is there something that I...

So far rained 2 out of 5 days here, so 40% lol.

Sorry, just checked and I had gotten a deal on it. It's currently $149 at Sam's Club for the Pro desktop version. https://www.samsclub.com/sams/quickbooks-desktop-pro-2019-accounting-software/prod22450383.ip?xid=plp_product_1_1

Normal QB Pro is only around $100. You wont' have to update it for a few years. That's what I use just to reconcile and for EOY reports etc.

I was able to upload one to Youtube originally and it seemed to convert, but image was upside down and only showed a few seconds. I'll study exporting to different formats and use my phone if all fails.

Handbrake didn't work. I'll just take a video with my phone when I get a chance.

Problem is the videos need the GeoVision codec to play, so they won't work on Youtube. Any easy way to get around that, or do I need to play them on my pc and record a copy on my phone?

I'm assuming he didn't get anything other than the change for each bill he put in. Had one gotten stuck in there, it wouldn't have accepted any more bills. Hard to tell on the video, but I didnt' see him scooping out change. Had no change come out, it would have shut down, so he had to have...

Last week someone tried to string my changers. He wasn't able to, so he got ****ed and took a crowbar to my meter box and stole my bill acceptor. Crazy part is that I was on the way to the wash and because of holiday traffic, it took me double the time to get there and I missed him by 5...