Search results

Washworld does it all the time without welding ports in.

I hope the .30 doesn't break the bank. Lol

I have the same issue with their swipers. Even a brand new swiper may take 3 or 4 tries to get a good read.

Same here. Their login is absolute trash

I took my trash cans out over 2 years ago. I will never go back. I have had less than 10 people complain, but most of them understood when I explained why. The ones who were really upset, I figured were my original trash abusers.

Is it a cracked fitting or the pump leaking? Its hard to tell water is going between the two.

I just wish someone would come up with a system where you mount the divider track to the wall and the panels just snap in. That way if you ever need to change a panel you just snap it out and snap the new one in. I know they say the other panels are replaceable but I doubt a replaced panel...

Its such a pain to try to purchase anything from carwash superstore as a walk in customer. You have to call and place your order ahead of time. When you call they won't just transfer your call, you get the 3rd degree from the receptionist, who are you, what company are you with, etc, like it...

I went through the same bs with them. They are a terrible company to deal with. I found someone to email me their manuals totally unrelated to any distributer or PDQ. If you still need them send me your email and I will send you a copy.

From my understanding the cryptopay tap will take phone payments. I don't have pay on my phone so I have never tried it.

Well guess you can't raise the current limit above 100%. I would check to ensure your incoming phases are equal and one phase is not extremely unbalanced or you are not single phasing the drive. These issues can also cause high current in one leg of the drive. Do you ever see the drive...

The motor overload percentage is set by parameter P108. I would doublecheck that they have the correct value in it and maybe bump it up a little if you are sure its not catching on anything. The doors are not freezing to the floor causing these issues are they? You may need a password to...

You won't win the chargeback battle no matter what kind of evidence you have.

You have to buy the swipe to get the tap. The tap is just an add on and has to have the swipe to operate. I wish cryptopay would make 1 unit that does both.

If you take an all stainless machine like a razor and you still have parts availability I would think you could run it indefinitely. Of course if you are type of owner that has to call someone everytime you have an issue it may be better to replace.

Can you just speed the pass up a little so the sensor is not on so long?

Their card readers are so tight to begin with, I have had some cards that won't even fit though the reader.

I use gates hose from CWSS. Doesn't seem to be any less quality than any other hp hose I have used. I also purchased a gates crimper and make my own hoses and buy their fittings which makes it nice.

I go to my washes every day. I can't imagine just going a few days a week. No one will take care of your wash and notice things that are not working properly like you would. Not to mention the countless times I get a call that something is not working and I have to rush to the wash and fix...

You could grind the concrete. Rental stores around here rent walk behind units. I had a wash that had pitted floors making it hard to clean up and rented a grinder and smoothed them up. The look much better. They use larger units where I work and polish the concrete up to look better than it...