Search results

We have them on am ACW 4 and another on an ACW 5. Work great! Fees for us are 2.5% + $0.10 per transaction

It's probably worth your time to get a company that specializes in billboard negotiations. As you know billboard leases are usually long term. The billboard company representative negotiates billboard leases all day long, most business people may do it once or twice in their lifetime. You need...

Let me see if I can find it, nayax support sent it to me a while back. Lots of good info in there about configurations.

This is exactly what happened last time too, coupled with variable interest. This time though, there is so much private equity out there ready to scoop up all the single family homes that will eventually come on the distressed market

Do you have the nayax pulse manual? There is a lot of info in there to configure pulse parameters.

I would be interested to know what the led6 is looking for to end the count up cycle and if the nayax can replicate it. Would probably need an oscilloscope hooked up to cryptopay if that information isn't available. I have started bypassing timers for nayax with a relay setup, which I prefer...

I don't think we will ever do this, but what kind of dye are you using and from where? I have noticed that most customers expect the tire cleaner to be bright green as @tdlconceptsllc mentioned.

Sadly nothing new, I could have already predicted this would repeat from 2008-09. And with all the handouts during covid, the can got kicked down the road, and made the consumer debt much higher in the process.

The relationship is definitely there. I was told directly by dixmor that Cryptopay was the electronics engineering contractor for the new led6. Cryptopay designed the new led6. Wonder if the nayax pulse settings can be tweaked to work with the new led6? There are a few pulse settings that are...

Would recommend cellular monitoring, voip and network not as reliable when power goes out. Even old telephone not as reliable as cellular as long as you have good cell signal. Worth the extra $/mo in my opinion. I will only use cell for my properties

Nayax may work if they use mdb. Nayax can be made to work with mdb or pulse

We put ours on the side with the meter to get more exposure, moved our foam brushes to the other wall. People will always find the foam brush

Have you tried ebay? I saw a few 12vdc Ecolab pumps from a quick search

How old are your timers? Old led6 used to work fine too, until they had a electronics redesign in early 2022.

Check online, there are hundreds, if not thousand, of monitoring companies in the UL database. Many will be cheaper than your current rate

I have some experience with alarm monitoring (which is pretty similar to fire monitoring), you want to make sure the monitoring center is UL listed. They have to go through a process for that and have minimum standards they must adhere to. Most UL listed centers will be comparable. I wouldn't...

We use the NC side of the relay to power the coin acceptor, so when bay is activated by nayax, the coin acceptor is disabled. I haven't tried turning the timer on and off, but didn't feel comfortable doing that constantly. We haven't had anyone confused, but we have had people try to combine...

I use a ac/dc converter to power the nayax and the relays, I have 6 bays running with this setup and works flawlessly.

Tokens taken from the bays is irrelevant with your current issue. Customers can decide to use or not use the tokens they purchase. You have to count the tokens installed in the changer at the beginningof the week, then audit that against the bills taken out at the end of the week vs the tokens...

Depends on the area, we are at $3 for 4 mins bays and $2 for 6 mins vac. Also customer perception is to be considered also. A lot will just look at start price and not cost per minute. I know an operator that won't raise his start price because of this, and I've seen it personally. He is at $2...