Search results

Im sorry but I'm not sure I'm understanding what you are asking. Your laser cabinet wiring will all stay the same and operate as normal. The diagram I sent you is just to remotely open/close your doors from your phone. It does not replace the wiring or program from your laser cabinet. You are...

All the laser cabinet does just like any other manufacturer is send a signal to your door controller to open/close a door. The same as if you were to push the button on the door controller. If you want to open/close from your phone you will need two or four wifi smart plugs and two or four...

Sounds good sir. You need any help just post it here.

VERY ROUGH. Just off the top of my head for a NEW build. Bay IBA + Dryers - 250K Wall Paneling + Lights - 10K Signage - 5K Doors - 16K Misc - 10K Exterior Pay Station + Canopy - 40K Vacuums - 30K BC + Vending - 10K Signage - 50K including road sign Building and Pole Lights - 10K Misc - 50K...

Never have I came across one that leaked after it was rebuilt. It is smaller. I never said it wasn't rated for the same pressure. Its inlet port is 1/4" smaller and its bypass port is 1/2" smaller. And if a solenoid fails to open? Ya like you said you did this for a living. Strava is new...

The only thing worn in the regulator is the seals. Thats why they make repair kits in the first place. You don't change your seals before it leaks do you? lol I have 6 of those regulators in service. Once they start to leak I put in a repair kit and there good for a few years. I also use the...

Have you been hanging out with Hunter recently?

You do not need to purchase a new regulator when it leaks from that little hole. A simple repair kit will fix it and it can be rebuilt in place. https://www.kleen-ritecorp.com/p-9992-repair-kit-for-gpu5221-general-pump-unloader.aspx

Sorry I looked over the vertical part. The macneils are vertical. The peco and mosmatic are not. I’ll attach pics anyway.

I have a few different sets. 2 sets are brand new (peco and macneil) and 1 set is used (mosmatic). I can upload pics tomorrow.

There is nothing worth fixing. There are plenty of used machines for sale that are not 40 years old if you don't want to buy new.

Ive had turbo nozzles for about 5 years on two machines. I’ve only replaced 1 out of a 100 nozzles. Like JGinther said do not let them freeze. The machine is still heated if your purchase that option which makes it a great cold climate machine. You don’t have to rely on your doors operating...

3 minutes is a walk in the park. My set up on my machines are very similar to yours. Like you stated dwell time is a must. You actually have to slow these machines down to get a proper clean.

The pumps are two Cat 3545. Additional booster pump for low pressure functions.

Please do not do this. There is no reason to buy from a Chinese manufacture that copies laser wash other then the price tag. You will get what you pay for. Also 2 months of down time when parts are needed comming out of Chyna. If your guy has a heart attack and dies tomorrow you can forget about...

Moving air from your equipment room is never going to work. You don't want to heat the air in your IBA. You want to heat the machine. You do this by installing the proper heater. A infared tube heater works the best for this. Its heats objects and not air...

Your absolutely right. The website is impossible. It does not get easier. I quit going on it a long time ago.

I agree. World pay is terrible. I have thought of adding the pre auth to the wash name but I just have been dreading the moment of calling world pay and getting transferred through six different countries. Ive had Nayax for a few years. I purchased 19 and at first when I fired them up I want...

Ive had both for years. Cryptopay on my bays and nayax on my vacs. If Cryptopay came out with a all in one card reader it would be a no brainer. Only downsides to Cryptopay is sometimes it does not accept a card for whatever reason which means money and/or customer loss. Also, the pre...

They use a sonar out in the bay. It cant be integrated into other wash systems. It has to be in the programming. Cant speak for Ryko but thats what Oasis uses.