Search results

I came into my wash this morning and my acw is saying its "out of service" I check everything there was several bill jammed in stacker. I pulled them out reset the machine and got a half one on validator right back to out of service. I by passed stacker same result any ideas would be...

Yep he is generally a prick! Maybe right on some things but a true A$$ with his delivery! And he don't have a clue about building in other areas as everything you said IS doable maybe low on what the total will be but we dont have the regulations like Florida! Heck your just asking for ideas not...

Whew! God bless ya brother! I know I don't know you but I'm damn sure here if Ya ever needed to talk! I am my family will absolutely have you in our thoughts and prayers!

Boy sounds like me to a "T".

getbusy I had the same problem at one of my washes I put in multitrons and got some tokens that only the pd had before to long I noticed for whatever reason that I thought other people was using them and by gosh I was right! I saw a family member using them! So they were giving them to family...

Absolutely! Way to often... for me!

I also got the info saying its ready and to contact Diane! I also without anything to base this off that it was very pricey as well. In my market cant imagine it being a benefit to my washes.

Been lurking in shadows a minute! I was first a member when I bought my first wash in 07. Had no clue about car washes but with the help of this site and trial and error I finally turned a profit and then sold and moved out of the area! Was determined to buy ministorages as I also had some of...

I am building new faceplates and adding cryptopay and bill acceptors to my bays. I have seen wiring diagrams before on these but can't remember where. My only concern is the bill acceptors I have never used these in bays anybody have any advice I'm assuming it's a simple wiring add. If I...

Sorry mr fix it I didn't answer your questions. It had a 2505 tip and replaced it with a new 1505 tip I did on two occasions try and turning regulator all the way down but will not do anything differant when wand is pulled only 800psi. As far as the seals are concerned I'm relatively sure I...

Ok we'll update!!!!!! This pos still don't work!!!!!! I have change the regulator put a new check valve on inlet and completely plugged off all other areas "soap wax weep" so it just water and pump still nada! It still maintains a steady 800 psi when wand is held???????? I tried to eliminate the...

We'll I didn't look at the valve orings thoroughly. It does have a check valve on the weep I'll take a closer look at those it didn't appear To be leaking.

Hmmm yeah I've had that happen before with the cavitation from Bad check valve but there is none! Pump runs fine smooth. I've put a new tip in yesterday still nothing. I'm probably missing the obvious. I'll check my fittings to set if There could be a break or something. Appreciate all the extra...

What about check valve on water holding it's relatively new but if it sticks could it somehow not give it enough flow?

Yes it does have a weep system. I went ahead and replaced the pressure regulator it is a para plate br-5 model. Still no luck so I tied handle off pull one by one the lines off from solenoids and put finger over line and to no avail. It is a older pump could it wash and do that? This is a new...

I have hypro 2400 series pumps in one bay it will do 1200psi until You depress handle in bay then it runs 900. I put new seals in pump to be sure but never had one do this could it be the Unloader bad???? Any suggestions would Be great!

Sounds good! Thanks!

What tip would you recommend?????

I purchased another wash almost a year ago. It is running hypro 2400 series pumps I have replaced all seals as we been trying to upgrade this wash. I have one problem that seems to be a thorn in my side customers complaining "When are you going to turn the pressure up!"I was running them at 1100...

I just installed cryptopay on my acw 4 everything works fine as it should swipe card verifies press wash selection but it does not start the automatic just says sale approved. Any ideas?