Search results

Anybody ever connected 2” pvc to vac hose? If so how’d you do it? PVC appears to be slightly larger than the swivel. I assume you want the swivel on the outside so you can clamp it?

Ditto in G&G. I recently installed 2 lights in each bay. They are expensive but I like them a lot.

Are you saying to mount the boom high enough that it swings over the HP boom?

I believe if I go on the top block the boom will hit the HP boom when it extends out?

I need some advice. I went mount my booms today and ran into some problems. As you’ll see in the picture my bays aren’t all that tall. I planned on mounting the booms just underneath the top of the HP hose. My problem is that I mounted the boom with about 8 degrees of lean to ensure the boom...

What kind of slant do I need on the boom bracket to get the boom to return to the wall?

I’m going to mount some air shamee booms in the coming days and was looking for some feedback on placement. The easiest place would be on the right wall with the boom falling backwards. My only concern is the HP rose. I afraid the vac hose may have difficulty working around the HP hose when it’s...

This one worked. Thanks guys!

I’ve got yellow tied in with pin 9. Black with pin 10. Blue and green with pin 2.

Still not registering with the timer.

Help me out here guys. I’ve got black hooked up to 24vac. Blue and Yellow to common. Green is tied to the pin 2 on the led 6 (coin pulse). The light in the unit is green. I can hear it register the coins but it’s not registering with my timer.

A lot of these members are very knowledgeable. Maybe sharing a few photos of the inside of your vacuum would help.

Thanks! Is this a swivel that you purchased? Or are you just using a regular vac swivel.

Kim, Where did you get the mosmatic swivel for the boom? Also what size clamps are required for the boom? Automotive clamps don't have as much adjustment as regular clamps. Want to make sure I get the right size.

How are you guys attaching the elbow? Does it have to be welded? Can it be clamped?

Thanks! I’m assuming I can just screw the contactors to the back of the box?

I need an enclosure for 4 air shamee contactors. Does anyone have any recommendations? I don’t have the contactors yet but would like to have the supplies when they get here. From the picture it looks like they can be mounted on a rail?

Ive got some air shamees on the way and want to go ahead get started with the electrical portion of the install. According to the diagram is lists a motor starter being needed. I know the contractor is included with air shamee but it doesn't mention a starter. Do I need to source a starter for...

They were originally Carolina pride boxes if that helps.

I need some new graphics for my meter boxes. Does anyone have any suggestions on where to get them designed and made?