Search results

Just wanted to give a kudos to Kleen-rite. I live in a fairly remote area for the shipping industry. My last two Kleen-rite orders arrived in two days with no backorders. That fast never happened before Covid. For a point of reference, my Amazon Prime which used to be two day shipping is up...

I use Cryptopay fleet. It works well as I have several fleet accounts and cryptopay on all my vacs, iba, and self-serve. Fyi it is not cheap, I think the cost include: 1. $30 per month 2. $.06 per transaction and 1.25% fee on each transaction 3. $250 one time activation fee. So not really...

Thanks Greg I will look into that. Would be nice to reset over the phone. It did it twice today with five in line, luckily I was there both times or it would have been a mess everybody backing out. I changed the Crypto swiper out because it seems to have gotten worse when we put a new...

My paystation locks up about every other day. Screen says "verifying". Stays there until I reset the machine. Any one else have this issue? American has never heard of it. Maybe a Crypto issue?

I use the blue continental hose from KR. In the last 3 months I've had 3 small blow outs in middle of 3 diff. hoses. The rest of the hoses had little wear. Usually the 4 inches around the swivel wear out first. I was hoping I just had a bad batch or I will have to try something else.

I have a 500-T that I would sell very reasonable. Haven't used it in six years but stored inside, so would need a little loving to fire up.

I was looking for same part for the cleaner install. Finally got it. Part # 21000233b at kleen-rite. Packs of 12. https://www.kleen-ritecorp.com/p-8866-flojet-21000233b-14-poly-tube-fitting-for-5100-and-g-series-pumps-12-pack.aspx

Just curious Dakota, did you get online yet?

Ok I'm not an computer guy so hope this make sense. In the instructions on page 7-10 it says the "gateway field is not used". I think this is wrong and that number has to be inserted.

I did our Saber a year ago. Step by step instructions in back of set up manual if you have that. It was fairly easy. Makes working on machine easier as you can jog and run machine while your up on a ladder with your head in it to see what's going on. Would be hard to live without once you...

Thanks Randy and everybody for the input. I set up one bay with regulator and injector. Works great and will probably slowly convert the rest of my bays over.

Currently using zero-pressure regulators to inject soap and wax in my pressure fed pump stands. Would like to switch to injectors. Which one are you guys using? Do you put in on the input side or output side of the pump? Thanks.

We have a new American Paystation with a Belanger Kondor iba. The way it works now is that when a customer is in the bay and the spot free cycle ends the paystation sends the next queried wash to the iba. The paystation says "Thank-you, please pull forward". It might take the customer in the...

Looking at the Kondor to replace our vector. What is better the one arm or two arm model? Also anybody with the light package have any comments if the lights are worth the extra coin?

I have a relative trying to sell me 36 storage units. We each have our own formula and price in mind. Obviously we are way off. What formula do you guys use for self-storage valuation?

I changed the membrane, I thought for sure this was the problem but it did'nt change the output of product water at all. The 3000 gpd on has one membrane.

The pressure is between 180 and 200.

We have a five year old 3000 gal per day pur-clean spot free system. Over the last few years the product water has slowly dropped from 2 gal per min to .5 gal per min. We changed the membrane, checked water flow out of carbon filter and checked the two solenoids. Still no change. Any...

I need some help too. I cleaned out all of the nest, applied a sticky product from Bird-X. The birds built nest right on top of it. It was a pain to clean the nest out the next time because it was all sticky. My wife hung their (Bird-X) sign in the E-room, it says "Who's smarter you are the...

Wished I would have known about repairing the gearboxes, the price of a new one was pretty crazy. Next time. :o