Search results

We use the CryptoPay swiper and 1034 R timer. Have shared wires with CC and IDX. I removed all the nuts and made sure everything is touching properly. I also suspected it had to be with cables but can't figure out.

I used the personality plug of that bay (not the one I am having the problem). Good Idea I can swap the personality plug and see if that zeroes down the problem.

I'm experiencing an issue with my X10 acceptor. It keeps blinking red/green and won't accept any tokens or coins. I swapped it with a new X12 acceptor, and programmed it, shows a green light, but it neither recognizes the value of coins nor produces any sound. It also doesn't reject the coins...

Hello - I am looking for some help with my AlamoBrand Carbon Filter, model number N2058 (attached a few pics). I have been unable to find the manual online. Does anyone have a copy? Specifically, I need to understand: How to set the current time. When to regenerate the filter. After how many...

No, I mean use the hot wax option for Graphene.

@Ryko CS How about adding the hot wax option for Graphene and removing the clear coat sealant option from the top package. Will that work? I'm also unsure about the sequence—will the hot wax pass occur after the ceramic coating? Just make this change and keep the clear coat sealant pass for the...

Thank you.

@Darin Thank you, that's what I suspected. For my setup, I have the ColorWave (Carnauba Wax) + Finishing Curtain, followed by a Fresh Water Rinse, Ceramic, Clear Coat Sealant, and a Spot Free Water pass. Is my only option to replace the Clear Coat Sealant with Graphene? Also, we currently...

I forgot to mention the high-pressure water spray after applying the tire chemical. I agree we can optimize some of these passes. I'm curious if this can be done on the Ryko system. My technician mentioned that, off the top of his head, he believes we cannot simultaneously turn on multiple...

I did think about replacing the clear coat with graphene. This works well for the top package, but it's too expensive for the lower package. Currently, a clear coat is applied to all packages. Additionally, my IBA (In-Bay Automatic) car wash doesn't dry the car well without a clear coat. The...

Hello - I need guidance on reconfiguring a few options on my IBA for the highest price package. It is currently configured as follows: Tire Cleaner Nothing (Return Pass) Triple Foam Side Brush (Return Pass) Top and Side Brush Side Brush (Return Pass) Carnauba Wax Pass Water Droplet from the...

Sorry, I was not clear. TDS for the RO water is 85 and the TDS for the pretreatment water which is an input to the membranes is 280 (Coming out of the Carbon + Sediment filter). Yes I am seeing the spots right now.

Is this the one that you are talking about Ozmosis XLE-4040 Reverse Osmosis RO Membrane for Water Filtration System 4"x40" ?

This message contains a lot of useful information, and I've learned quite a bit. I realize that I need to invest in a water softener and replace the media in my carbon tank. I also plan to measure the chlorine levels. Currently, the RO water measures around 280 TDS, but I haven't measured my...

Thank you, reject water from the RO, right? Also, what chlorine levels should I look for that indicate it needs a service?

I did not see anything on housing, as suggested here I plan to gasket to a hardware shop and get a replacement. Thank you everyone.

Hello: I am currently using KR membranes https://www.kleen-ritecorp.com/p-44539-kleen-rite-reverse-osmosis-membrane-4-x-40-inches-2500-gpd.aspx two of them on my JC unit. I end up replacing them every year, and my TDS meter is currently reading 85 ppm (due for change). I have a few questions and...

Hello, I have a JC system, and the blue sediment prefilter O-ring has worn out. Does anyone know the correct size for this gasket? A part number or a link to a suitable replacement from KR or Home Depot would be very helpful. Thank you!

Here is a good Youtube video for testing 3 phase motor:

If you have the latest iPhone Pro Max, it may help. I have got better results on my iPhone in enhancing such images.