Search results

Take apart the solenoid valve you probably have some debris under the seat inside the valve.

Do what Pat has said and run a tap into the holes, you don't want to strip out the treads in the hub. Before you try pushing the sheave off hub spray the hub with Kroil or PB Blaster. When you use the bolts to remove sheave from the hub alternate from one side to the other as you push it off...

That's why we always turn off the power to the bays when we close down the bays during freezing weather, keep the dumb public out the wash.

By removing the regulator it increases to voltage to the display. The Red Cyrytopay display also has a library of words built into it that could be confusing the Nayax reader.

When you install Cryptopay on a ACW-4/5 controller you cut off the 5 volt regulator from the board and install a jumper around around it. I have a unmodified ACW-4/5 controller.

Try calling Liftmaster commercial at 800-528-6563. A opener that old might not be supported anymore.

They'll work. What kind of timers are you using? If your using a Dixmor change the setting on the dollar bill side.

Yes it does.

What model Cat pump do you have?

Less then $30

The only person you should be pissed off at is yourself! Living 3 cities over from your car wash your bound to have problems. What is expected of your so-called maintenance guy, does all he do is dump the garbage? My maintenance guy has keys to get into the equipment room, looking for anything...

New from Parker Engineering is a isolator to go from Nayax MDB to pulse. This Isolator was developed to be used with the Dixmor timers so the Dixmor timers can be used for count up with the Nayax card readers. I believe it could be used with other 3rd party credit card readers. Installation is...

Thanks for coming back and sharing what took to fix your problem.

It's on the side of the coin acceptor, it makes the coin shoe go in and out. If the center screw gets loose it won;t work right.

No don't use any lubricates on the Hoppers. Don't do what customer of mine did and use electrical contact cleaner on the inside plastic of the hopper, it will destroy the hopper right now. After he did it he tried to tell me it was on warranty, it was only about 9 months old.

Over the years I’ve some pretty cool stuff at the car wash. One Monday we drove into the car wash there was a expensive 3 person tent with nice sleeping bags, small backpacker stove, a lantern and a bunch of personal items, no ID. Looked like they took out of the back of there car and left it...

If it's a IDX coin acceptor check the solenoid on the side of the frame, if it's not loose take it out and replace it.

turn off the power to the changer, remove the Hopper from the changer, take the front cover off the front of the Hopper, remove the black baffle. Clean the inside of the Hopper nothing stronger than Windex, check for any debris under the Payout switch arm. Turn the Hopper over and check the...

What are you using to control your pump? MX-8 multi-plexer or something else? Using your voltmeter starting check for power back to the source.

Have you given any thoughts about joining the 21st Century and installing Dixmor LED-7 timers