Search results

Thanks what i see is the roller on the gantry are with bearings and no grease fitting, the trolly rollers have a grease fitting and have a sort of e-clip holding them to the shaft. The ones on the trolly i assume you just pop the clip and slide off and replace *To remove i would guess...

Hello, Time to replace rollers there wore down but still roll fine. The question is: The current rollers all the way around trolly/gantry have bearings and grease lines. I do not have the dryers, my dryers are free standing. From what I understand you only need the bearing...

Harrels sent me a bag of them from pdq exact replacement Thanks

HELLO HOPE ALL IS WELL I WAS GOING THRU SOME OLD THREADS AND SEEN THAT YOU HAD REPLACED YOUR ROLLERS WITH WASH WORLD BRAND. I NEED TO REPLACE MY GANTRY AND TROLLY ROLLERS. WHAT I NOTICE ON MY MACHINE WHICH IS OLD AND HAD SOME HILBILLY INSTALL IT IS THAT ALL THE ROLLERS HAVE BEARINGS AND A...

Thanks that's kind of what I got going on thought for this spring I might tidy up any idea where we could find replacements that are the same besides the old box I found similar stuff but nothing that would snap it into the same so it'd be nice and og neat

Hello hope all is well need to replace some of the Wago's in my j4 box anybody have a source Thanks

What about my machine gets a phantom 25-cent credit anybody ever see that? Acw4

From the maifold they have a push fitting with 3/8 tubing to each hydro I put a meter on other day pressure is @65 with nothing running with two running drops to 55ish all four running holds at just under 50 On another note what about these footvalves (blue) they stink. I just bought four...

aluminate very toxic but it cleans boat hauls, auto wall panels and all the s.s. rails, holders, vacs. Only thing ive found to be spray on spray off that easy, its very toxic and burns specialy straight up. The dollar store toilet cleaner is very effective also on boat hauls and wall panels...

5 hp little wonder push be behind little prices but a blower is a good investment. We sweep up a bit spray all the bays out into lot and then blow the lot out very helpful

https://potholebind.com/ My friend developed this he sent me a couple bags i let you know how it works im going to try a couple spots in my parking lot he said just put it right on and let settle and smooth out

Thanks fellas, On the 4 banger we have a 1/2 inch copper that when hits the tank maifold splits to 4. ps, fb, tire, foam gun On the 3banger 3/4 off main then at tank splits to 3/4 feed for hp tank, and 1/2 inch to the Hps and wax. My streets usually around 60/70+ All these years When i...

I finally got it been driving myself nuts with chemical concentrations in tanks. One day its good next day or hour its water down, changed hydro, changed this changed that. Its the water pressure, i have a 4 banger tank for Ps, Fb, Tire, Foam gun all fed by one line thats then split into four...

Sorry if i missed it in the other answers but mine had similiar problems. i fooled with the wiring and sonar etc... finally i just unplugged it all and let the machine run from left limit to right limit arch doesnt get as close as id like but it runs. good luck

What are tell tale signs that the valve is bad or leaking that you would notice if just looking at the pump station. thanks

thanks pulled the y35 off and wh/blue wire and contacter still stuck. opened it up and one of the prongs has welded itself. PDQ GUYS WERE GREAT

High pressure was running

Hello hope everyone is well Got a call from the wash that 4000 was spraying water it was in the home position no lights were on and no car. I watch the video a car went through Went past the dryers in the machine kicked on but no lights turn on. Only thing I can think of maybe the guy bought two...

cat 310 2505 better fan than 1505 11/1200