Search results

I do appreciate all the input from everyone. My plan is simple for now. Waiting for guy to send me price of shipping on the air logic and replace that old well pump with that. Then get water softener figured out and soap straightened out. Then just maintain things and see how system does.

I actually was putting those pieces in the cart at Kleenex rite when I ran across one already together for not a lot more than what it was gonna cost me to build it. Ideally I would like to get this done and see if we can skate by a year before replacing the pump stands. I’m kinda interested in...

I’m located in southeast Kansas, and the building was built in 2007 but guessing the owner bought an older setup to outfit it. I have a plan in motion to replace soap brush with air logic FB system. And the rest I think will be fine with a soap change and proper ratio.

Tell me about it, im learning tho.

Considering there was no air compressor on the property...im fairly certain.

Well I am very grateful for the helpful information and your time and everyone elses that has provided input to my problem. I think its pretty well been determined that the problem lies with the type of setup I have not an intermal problem within it. So I will do some shopping and see what I can...

When I hear the term pump stand it makes me think of a metal shelf to put the crap on. But used for $5k Im guessing your not talking about just a metal stand. Is there anywhere in particular that is a good place to shop for used equipment?

I dont think I can justify the new pump stands at this point if they are $30-45k from Kleen-rite. Adding a new low pressure board and a compressor wouldnt be to bad. And no we dont have foaming tire cleaner or Foaming presoak. The soap ratio in the holding tank is pretty soap mix but thats...

I believe the hydrominder is working as it should, it does pull in soap and the liquid in the tank is a bright red and not watered down. I havent checked to confirm the tip ratio to see if it is appropriate with the soap recomendation. I have no air injection on this system. I feel my problem...

I will give this a shot, I do know there is no clog at handle as we have taken the brushes off the hose and water comes out but its just clear water with minimal soap residue. Not enough to have any color change and im using cherry colored soap. But I will try and pull lines off pump today and...

I have it in the cart and will get it ordered today. Thank You for sending me the link. I figured there was a way to test it but when there are so many different things needing some attention its hard to determine where to start.

I have checked the hydrominder setups and they are working and pulling soap. I havent checked tips to see sizing but I did flush lines out between them and the pump and didnt change anything. Functions on SS bays show Triple Foam Conditioner, Foam Brush, High Pressure Rinse, High Pressure Wax...

I turned off the valve allowing regular soap to be drawn into the FB pump and it still didnt change anything or not enough to notice. Its like the pump isnt drawing the FB soap in.

Iknow it has a propack h100 water softener system but i dont know anything about it. I dont know how to test the hardness of the water either.

So I just purchased this carwash that was built in 2007. This is all new to me so im trying to learn it. Everyone in the small town is complaining the carwash doesnt put out any soap. I originally thought the soap tanks mounted on the wall maybe were plugged. I removed line off the bottom and...