Search results

RECIEVED A NEW BATCH OF NEW MICRO COIN ACCEPTORS, COULD NOT GET THEM TO PROGRAM, AFTER SEVERAL PHONE CALLS FOUND OUT MICRO COIN CHANGED PROGRAMING SET UP AND FOR GOT TO TELL ANYBODY. NOW THE PROGRAMING IS A LOT HARDER TO PROGRAM AND YOU MUST LOOK CLOSELY AT THE BARS AS THEY LITE UP MICRO COIN...

noticed same designs in Romania during our vacation in Europe, very nicely done, their payment systems are different and do it yourself are usually located with a gas station saw more self serves then tunnel operations over there

using 100 r1 at hose single wire braded hose and a 3/8 fitting we find that diameter used during crimp is about 40 thousand on a crimp hose, recommend u find a good hydraulic hose maker in your area and make up new hoses that will confirm weather you have a crimp problem

just finished buying a new hose crimper machine a german make thru discount hose company, we make a lot of hose for our coin ops. hose we us is 100r1 at hose and buy 500 ft reels . machine came with multiple sizes, when looking to buy we also noticed portable hand pumped unit, ours is fixed and...

having quite a few problems with green stripe hoppers, screws support breaking, easy jams, design is weak and require a lot of belt cleaning, limited to 1$ tokins to limit jams. we have all ready replaced 5 hoppers with existing design because there is nothing better DONT RECOMMENT AMERICAN...

looking for fragmatics support not laural not chip, not pat

teck support during transition to Kleen rite has gone down the tubes, we get back to you but not in the near future

BEEN ON STAR LINK FOR 3 YEARS NOW, IT WORK GREAT

QUADRA VAC one motor will not turn FOR FUNCTION 1 traced problem to control, would like to replace BUT NEED TO CONFIRM THATS WHERE PROBLEM IS, 2 MOTORS should turn on for function 1 function 2 is one motor start. if control board is bad replace at $600 a board would like to verify problem kelly...

nice product, very popular wish we could contact them we have a minor problem with vacuum that requires technical support, left messages with Kelly no response equipment been out of service 4 week now. just need to know what part is bad so we can replace and get unit running

made several attempts to get FRAGMATICS information/ parts. no results, no call back.in the past always found them very responsive, not sure what their status is

one air regulator controls pressure to flow jet flow, other regulator controls air mixture making /mixing air /water ratio check air regulators so they adjust and maybe replace flojet

we use the lam motors, the reason is Vac brush replacement is losing 2 screws to replace brushe, vmk motors are harder to change out due to using a metal tap to get under brush's,

WE HAVE DONE SEVERAL UP GRADES IN STAGES LIKE SOAP SUPPLY TANKS , FEED LINES AT ONE STAGE, PUMPING PLANT 2 PUMPS PER RACK, USED SEVERAL RACKS HAVE HAD GOOD LUCK WITH HARD WARE FROM HYDROSPRAY WE HAVE ORDERED CUSTOM MODIFIED EQUIPMENT WHICH THEY SUPPLIED, IF DONE IN STAGES NOT TO PAIN FULL

looking at the pumping ,Maintenace will have to be done, look closely at component location they will break and its nice if its easy to fix, we customed ordered hydro spray units, they were nice enough to change and do some custom build pump/motor stands and install different pumps that they...

620 /623 we have seen a 30 + years of service closer to 40 years life span ( we have close to 25 pumps in service), after a couple years of use we replace inlet seals/cups as they are a ware item, pulsation dampers are a rare replacement when compared to inlet seals/cups. when we hear a cavation...

not happy with pump life span for Gould pumps, use 1.5 hp units with200 psi sfr, unit in bays , one unit was just replaced lasted 3 years before booster pump started losing out put pressure to car wash bays, any recommendations for a replacement pump, realize Gould pump is cheapest way to boost...

would a grand father clause exempt your system, let the new guys handle the problem

as operator of multiple locations we keep a high lever of service with updated equipment. if things are going smoothly we get scared. We get and been brought down to earth on a routine basis by problems all the time. Business requires a lot of different talents. Over the years we have acquired...