Search results

My undercarriage nozzles are above the concrete, wanting to protect them from tires damaging them or the tires getting damaged. Call the installer they said I had two options, 1) remove the undercarriage system or 2) cut the concrete and put them in them in there. Does anybody else have any...

Just wanted to say thank you to all of your responses. My conclusion is that I will pay 50% of the tire and I will also take Reds advice and put up signage to stay in the middle of the bay. I also am thinking about painting yellow tire stripes leading into the automatic bay. Thank y'all again...

camera shows what really happened to the tire Should have watched the video of the car first. The nozzle did not damage the car. The car bumped into the guide rail, then drove over the guide rail and the tire was now in between the gantry rail and the guide rail. The tire was damaged when the...

Customer drove into the automatic bay crooked and hit the guide rail, so they backed up to get straight and while backing up ran over a undercarriage nozzel. The nozzel caused a hole in the tire. They now what me to pay for the tire. Has this happened to any other CW owners? If so did you pay...

how do I replace the membrane and charcoal in my ROM-1500?

I have a D&S three selection electronic rear load vender and one of my selections will not drop product. I insert money and all I hear is a humming noise and then it stops. Any ideals what might be wrong?

Thank You for all of your responses. I am going down there today to ck it out. I'll let ya'll know what I find.

Replaced the solenoid valve on my weep system and now it will not work right. Hopefully I can explain this. First I replaced it with a N.O. solenoid. When the weep system was supposed to be off it was on. When it was supposed to on it was off. So I swapped the wires around and it did the same...

On one of my bays if you turn on presoak both presoak and tire cleaner solenoids are eneregized. I have done the screw driver test and both are enegized. I have ran a wire directly from the tire cleaner solenoid to the terminal strip in the control panel but it still energizes. I have replaced...

I am going to replace all of my low pressure hoses. Does anyone have suggestions on what type of hose to get? Presoak, foam brush, tire cleaner are my low pressure products. Thanks for helping

One more question, On the virtual treadle, if a car is two far to the left and is over on the other side of the guide rail, the eyes of the treadle sees the passenger tire, the horn goes off the scrolling sign tells the car to stop and thinks that the car is in position. The machine starts...

Thank you for your help. I willl be contacting Coleman today. carwash1970

What system do you have, I was told that a tire treadle would not work with the WW 2.0. If it will work is there any info you could give me?

The machine will start a wash when the cars drivers side front tire is on the outer side of the guide rail. This happened with my ww2 damaging a car. Is this a design problem Coleman has with there ww2? Has anybody else had this problem? If so what did you do to fix the problem? Carwash1970

one of my 5co2120w cat pumps needs to be replaced. I was thinking about replacing it with another brand that might not be so expensive. I know that cheaper is not always better, but I thought maybe someone could tell me if they have had any luck switching brands. I have tried to rebuild them...

No it is a breaker that flips back and forth.

On one of my self serve bays when you put money in and the time starts the bay breaker on my self serve panel pop for that bay. The timer still counts down but none of the bay fuctions will work. I have never ran into this problem. Were should I start to figure this problem out? Thanks for...

OK - this is probably going to be called vacuum ignorance, but I have heard of vac brushes, but I have never changed one. How do I check this out? carwash1970

I have a JE Adams vac that has stopped working. I have replaced the fuse, timer, coin switch and the wires that go from the coin switch to the timer. The vacuum still will not work? I have also tested to make sure that I was getting voltage to the vacuum. The wires that go to the vacuum...

Changed my water regulator on one of my bay pumps yesterday b/c it was losing pressure and vibrating. Put the new one on and the pressure is good but the vibration is worse. The vibration starts when the pump turns on but after the trigger on the wand is pulled it stops but starts back up after...