Search results

ok..i'll check the bypass..thanks:D

Not sure about pressure reading...I'll look at theat today As far as chuging..it stops and goes,instead of running smoothly

When its running(handle is not depressed in bay)it chugs. When the handle is pressed,it runs fine. Things i've done~Replaced and tighten belt~Same issue Replaced contactors in the NEMA motor starter. What puzzles me,is when i disconnect the...

It wasn't holding air. I never worked on an air compressor before.Dont know what part i need or where to get it.

Randy, It was there when i bought the wash. I took it to the shop to have it repaired. It's a 20 gallon coleman black max series.

I have a compressor that i want to replace. It's for my 4 bay ss. Dont know the brand, but it is a 20 gallon 115 volt compressor. Any recommendations..thanks

Replaced all "o" rings Pump runs like new.... thanks

When i pulled the valve out, the "o" ring was still on the valve but in bad enough shape that it has to be replaced. Only one "o" ring was good enough to leave on.

Would the "o" rings on the valves cause the pump to lose pressure? Five out of the six were bad when i checked them. Could it be that some of the "o" ring that was bad fell in where the piston is?

Thanks Wally.. The belt was loose, I tighten it up abit and it work like a champ.. I appreciate all the input guys...

Yes i have changed the cups on the 623 several times. The pump is chugging along. I have removed the guard, the belt is fairly new,no cracks, but alittle loose. I'll tighten it up some and see if that does the trick.

So i will check or replace the belt if needed first.

The pump is actually chugging(not really running)I like to get some input from you guys. Could it be the belt? The motor? or the pump? It's an older cat 623. thanks

Thanks for the input.. I'll installing one next week

The inspector came out to check my boiler..and like last time(3 yrs ago) he said i need a flow switch. I told him the raypak never had a flow switch since this was put in service about 10 yrs ago by the previous owner. Two yrs ago someone turned off the city water to my wash and when i...

Anybody have someone they could refer me to so i can refi my loan on the wash? thanks

I tried to upload my pics,but it keeps failing

It seems that the(Alamo) control unit on the cylinder is not closing all the way and water from the 1/4" line (from cylinder to the brine tank) does not stop. It overflows. To stop this i manually turn the timer. My question is..Does anyone know about this system or know of a co. in the Dallas...

Does anyone know where i can order a new 7.5" safehead(kleen rite has one) i'm looking for more options..thanks

thanks MEP