What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

AC8001 printer problem

F

Faceonglass

Member
The problem is I do not know what is wrong with it. It gives a message "Printer Failed".

I have cleaned it up and reattached, same message. I am hoping it isn't a complete replacement, so has anyone had a similar problem?
 
Yes. I like their machines, as I have 8 of them. But they can not seem to make a printer that works properly all the time.

Take an air duster and blow it out good, put the paper in and lock it, then turn the machine off for 5 seconds, then back on. If you still get printer failed, it is the printer OR the harness. I have had a harness go bad with no visible signs of damage, so I keep one in stock now.

If you have another machine, switch harness or the printer to isolate. If it is the printer, I think they rebuild it with a new head for about $250. A new harness is around $20.

Good luck with it.
 
You must log in or register to reply here.
Back
Top