Red Baron Active member Joined Aug 30, 2007 Messages 1,162 Reaction score 3 Points 36 Location Idalou, texas (near Lubbock) Apr 3, 2008 #1 My air gage on my D&S 5000 tri foam pegs out at 100 psi+ when the compressor is running, but goes back down to the set 60 psi when the Flojet comes on. Any ideas? I can't find any checkvalves in that line. Is my regulator bad?
My air gage on my D&S 5000 tri foam pegs out at 100 psi+ when the compressor is running, but goes back down to the set 60 psi when the Flojet comes on. Any ideas? I can't find any checkvalves in that line. Is my regulator bad?
BayWatch Jedi apprentice Joined Nov 19, 2007 Messages 160 Reaction score 0 Points 16 Location Hub City, Tx Apr 3, 2008 #2 Is it possible the regulator is on backwards? Should have directional arrow.
MEP001 Well-known member Joined Aug 30, 2007 Messages 16,665 Reaction score 3,948 Points 113 Location Texas Apr 4, 2008 #3 The regulator is probably just seeping by - as long as it's not keeping the solenoids from opening or leaking air all the time, it shouldn't matter.
The regulator is probably just seeping by - as long as it's not keeping the solenoids from opening or leaking air all the time, it shouldn't matter.
