What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Bay lights photocell location

Rtharlan

Member
Where do you put your photocells for your bay lights? Outside or in the bay? Currently outside pointed down half covered and i still feel like they come on too late. Do i need higher quality sensor?

It seems to me it would naturally be a little darker in the bay, so wouldnt you want to sense the light in the bay?

thanks
 
I would cover it a little more. If you have it sense the light in the Bay, it would more than likely trigger on/off every 3-5 minutes as it's picking up the light it's creating.
 
I've fought with photo cells for bay lighting for years. I have never been able to find a location and adjustment that doesn't let them come on too dark, or stay on too long, or come on if it rains during the day. I ditched them and went with an astronomic timer. A good one is about as much as a mechanical timer, it's pre-programmed with all the sunrise/sunsets year 'round, and you can set usually two separate banks up to two hours before or after sunset or sunrise. I set the front half to come on 20 minutes before sunset and the back half at sunset, all off at sunrise. I used to have the back half go off at midnight, but LEDs are so cheap to run I just leave them on all night now.

This one runs off the batteries and switches the circuit even if the power is out:

 
I just leave the LED lights on all the time. The power consumption is low enough that the security benefit of being well lit is worth the power cost.
 
Back
Top