Bridge axles 4000

[Ontario Car Wash]

Can u use a wash world axle bridge passenger and driver side on a 4000
My 4000 measure 15" and 13.5"
Wash world is both 14.5" ???
Thanks

 

[lag]

When you order it from a WW distributor or WW directly, just let them know it's for a LW4000. They will get you the correct parts.
We have never had an issue getting the correct parts for the older LWs from Washworld.

 

[Ontario Car Wash]

I did and he gave me 2 that both measure 14.5" and said they SHOULD work? Pdq calls for 15" and a 13.5 on passenger side. Are they just splitting the difference or is just NOT going to happen and order pdqs.

 

[whitescout]

The axle shafts are the same for a laserwash or a high velocity. The axle shafts for the driver's side bridge, and passenger's side bridge are different. One has two keyways, (gear box, and coupling), and one is coupling only. It sounds to me like you received two of the same parts, and it almost sounds like you have the axle shafts for the trolley.

 

[Ontario Car Wash]

They sent 2 driver sides
They are compatible
Driver has on keyway
Passenger side 2 keyway and bit shorter
On to the next project figure out how to get the gantry heat up. Cya at that post thanks everyone