Jimmy Buffett
Active member
I need the transmitting photo eye for my overhead door. Anybody have a good source for these? How do I know which one? When I go to their website I get very confused!
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Carlo Garvazzi
- Thread starter Jimmy Buffett
- Start date
soapy
Senior Member
You can try astromatic. Check the color of the wire. One side is grey and one side is black. When I get a new one from ryko it still had the part number on the bag. I have been able to get mine locally from a company called Kaman bearing. They have locations throughout the country. That has been my cheapest scource.
lag
Member
The black cable is the receiver. Gray cable is transmitter. I have some newer style amps , they have lights to show what eye is the problem.
GV does have a quite a selection of sensors. Usually the biggest difference is measuring distance.
We use part numbers MOFR-M14-8 for receiver & MOFT20-M14-8 for transmitter.
They are on LW 4000's , Washworld HV's.
GV does have a quite a selection of sensors. Usually the biggest difference is measuring distance.
We use part numbers MOFR-M14-8 for receiver & MOFT20-M14-8 for transmitter.
They are on LW 4000's , Washworld HV's.
Whale of a Wash
5 Washes 36Bays 2Vectors
Lag is right the newer amps will tell you which one is the problem, but 90% of the time it is the receiver that goes out. No good sources that i have found so the few receivers i have bought were probably close to or over $100 from what i remember. Try calling airlift and see if they will sell one, or help with your problem.
Jimmy Buffett
Active member
I had a reciever but not the transmitter. Turned out to be the amplifier. Of course now that my doors and heater are fixed it's 60 degrees outside.
