"EXCEPT" that you cant do credit card count up on a combo vac? Is that correct? My understanding is because of the two tiered pricing you cannot do count up? I am putting 10 refurbed Coleman Combos into service now and that seems to be my findings?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Coleman 1034r
- Thread starter mattjsayers
- Start date
"EXCEPT" that you cant do credit card count up on a combo vac? Is that correct? My understanding is because of the two tiered pricing you cannot do count up? I am putting 10 refurbed Coleman Combos into service now and that seems to be my findings?
Yes,that is correct. The LED6 has no programming to recalculate time during count up for the different prices. You can do swipe for fixed price or swipe and add money by pushing the button. It will require a little more signage and there will be some customer confusion because the bays and vacs will act differently.
1034R Timer just went out on one of my Coleman Hanna Vacuums. Replaced it with Dixmor LED6S.
Does anyone know the bracket part # or where to get it that will fit into Coleman Hanna vacuum? I need that will hold the Dixmor, the 1034R and LED6S aren’t exactly the same.
This is the 1034R:
Does anyone know the bracket part # or where to get it that will fit into Coleman Hanna vacuum? I need that will hold the Dixmor, the 1034R and LED6S aren’t exactly the same.
This is the 1034R:
Anyone know the part # that I need for the LED6S bracket to fit in Coleman Hanna vac?
thabks!
Ahh I found it:
www.kleen-ritecorp.com
Wish I saw it before ordering The timer. End up with $50 shipping for a $10 part!
Kleen-Rite Corporation - MOUNTING BRACKET FOR DMLED6
MOUNTING BRACKET FOR DMLED6
Wish I saw it before ordering The timer. End up with $50 shipping for a $10 part!
That sucks! You should have at least bought a couple more. I bought a few in anticipation of changing a few 1034 R's in the future. I also started keeping a spare LED6s. You could have also just modified the current bracket to get by until you needed other items. Just cut one or both sides off.Ahh I found it:
Kleen-Rite Corporation - MOUNTING BRACKET FOR DMLED6
MOUNTING BRACKET FOR DMLED6
Wish I saw it before ordering The timer. End up with $50 shipping for a $10 part!
MEP001
Well-known member
You can use the 1034R bracket until you order the right one. Just hammer one side flat and bend the tab with the screw hole all the way around, and it will line up with the stud thanks to the hole being slotted. It's not perfect, the timer will be a little off-center but it's pretty close compared to just ramming the Dixmor into the bracket like I've seen people do.
