Dixmor 7 wiring??????

[cap732000]

Ok hopefully somebody can point something out that I maybe missing! I replaced my 8 selection rotary to a 10. I'm running a sensortron acceptor and adding new dixmor 7 timers but here is my problem! I have everything hooked
Up everything works I can hit
Bypass switch everything is fine accepts coins turns on timer but does not turn on bays? It is getting 24 volt out the output wire but does not turn on it just count down! The wires all seem fine any clues???? Ive slept on it days trying to come up with possibilities! To no avail?

 

[BBE]

Is the "timed load" wire coming off of the led7 going to your rotary switch in the right spot? That's what it sounds like to me

 

[MEP001]

On your old 8-position switch, the timed load goes to 11 and 21. On the 10-position, it goes to 10 and 20.

 

[cap732000]

Yeah your correct Mep I finally figured it out today! I went thru electrical school and the ole teacher always said if it's doing something weird and not explainable look at neutrals and grounds. That's what it was found it by accident think I'm on my path in morning to finishing it up! Thanks!