Thecarwashco
New member
- Joined
- Nov 22, 2024
- Messages
- 1
- Reaction score
- 0
- Points
- 1
We have recently upgraded a Hamilton gold line to Hamilton HTK. There was a relay on the old gold line that I am assuming sent a signal to the conveyor to start. The relay has been eliminated and we can't figure where the input is for the tunnel conveyer and or what the voltage is needed to start. Followed wires for longer than I would like to admit but it is chaos, I've got a new relay to a photo eye just need to know power and input location. Thanks for your help
