aca carwash 2
Member
hello gang, Ds 5000 does a pass to the rear then to the front of the car then the blowers come on. Any thoughts? Just thawed out after 5 cold days....computer says front treadle
Ds 5000
- Thread starter aca carwash 2
- Start date
MEP001
Well-known member
It's not the treadle. That is what happens when it doesn't see the flags at the end of the rails. Run it again and watch/listen to it - if it comes down hard on the springs and strains like it wants to keep going before it shuts down, check the flag and prox.
aca carwash 2
Member
its reading the flag as #6 lights up on the in circuit but the exit light #27 comes on and the blowers come on. could it be the prox too far from the flag if its still reading it? its about 2 fingers
aca carwash 2
Member
it was the encoder, too far from the wheel
