What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Good Vendor for replacing Jim Coleman SS Bay doors

B

Buzzie8

Member
I am going to upgrade my SS bays away from the JCC Swipe N Clean to another credit card vendor (not sure what company yet). All of them will require me replacing my Swipe N Clean doors and B&C timers. I will use my current coin and bill acceptor. I probably will end up going to a local machine shop to have the doors made but thought maybe someone has already done this and had a good machine shop who has the pattern. My doors are roughly 17 5/8 x 11 5/8. I have also considered having the push button holes welded shut and cover them with a new decal after installing a 10 position rotary dial. If anyone has done this your help would be greatly appreciated.
 
Check Dralco.com - they might have something ready to cut. They don't deal direct but they can refer you to a distributor.
 
Don't know if this interests you, but you can get rotary switch doors from Coleman. Their are some economical add on CC systems that will just pulse your existing timer. One uses cell phone service.

I have a EVE system and although it has been overall reliable, I have had several instances of customers being charged over 130.00. So far I have been lucky and it hasn't caused them major problems. But if this happens to someone and they start bouncing checks because of it, it's going to cost someone a lot of money to fix. In addition, the CC rate is near 10% when you add long distance charges. But anything is better than swipe and clean!
 
You must log in or register to reply here.
Back
Top