HHC controller error list

[Rudy]

Anyone have a error code list for the old HHC controller?

The HHC controller inside my RNS is flashing a 3 then 4. Of course, it's the weekend....so I don't have a clue what is going on....

 

[Randy]

Anyone have a error code list for the old HHC controller?

The HHC controller inside my RNS is flashing a 3 then 4. Of course, it's the weekend....so I don't have a clue what is going on....

Are you sure it's a 3 - 4 flash and not a 4 - 3 flash code. A 3 - 4 code is dollar input stuck. a 4 - 3 coin switch stuck. Either way you've got a bad switch. Take the cover off the Hopper and clean any debris from under the switch arm, if this doesn't help replace the switch.

 

[Rudy]

Thanks Randy. No I'm not sure if it's 3/4 or 4/3 since it was reported to me by one of my attendants.

Are the codes the same for the C2000 and the HHC? I had error codes for the C2000....and wasn't sure they were the same.

 

[Randy]

Thanks Randy. No I'm not sure if it's 3/4 or 4/3 since it was reported to me by one of my attendants.

Are the codes the same for the C2000 and the HHC? I had error codes for the C2000....and wasn't sure they were the same.

Yes, for the most part the errors codes are the same.

 

[anjali14]

Call Hamilton at 1-800-837-5561 and have them walk you through the Controller programming, it can get confusing if you've never done it before.

 

[Randy]

Call Hamilton at 1-800-837-5561 and have them walk you through the Controller programming, it can get confusing if you've never done it before.

There aren’t any programming or adjustments with the older HHC-v5.3 controllers