What's new
By:
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Nayax MDB to Pulse Isolator

R

Randy

Well-known member
New from Parker Engineering is a isolator to go from Nayax MDB to pulse. This Isolator was developed to be used with the Dixmor timers so the Dixmor timers can be used for count up with the Nayax card readers. I believe it could be used with other 3rd party credit card readers. Installation is simple and the price is very reasonable.
 

Attachments

Last edited:
Does this allow count up? Looks like a relay to get from nayax pulse to any timer in count down mode. It's not converting mdb to pulse
 
Randy said:
New from Parker Engineering is a converter to go from Nayax MDB to pulse. This converter was developed to be used with the Dixmor timers, but I believe it could be used with other 3rd party credit card readers. Installation is simple and the price is very reasonable.
Click to expand...
Nayax doesn't need a converter, it just has to be programmed for pulse instead of MDB.
 
Should be pretty straight forward as long as the Nayax device can manage holding the signal on for count up. The LED6 is capable. Should be two wires, 1 to input 8 and 1 to input 9 on the LED6.
1740056611128.png
 
You must log in or register to reply here.
Back
Top