Need assistance with LED7 and Multitron

[MDrost1]

I received a new Ultra Tron meter door from GinSan. It operates off a GS65 board.

The new door has a Dixmor LED7 and an old GinSan multitron. ExpressKey and CryptoPay.

I have been having the hardest time(with help from GinSan as well) to get the LED7 to receive coin pulse from my multitron.

I reprogrammed the multitron many times today.

This is what happens:

I wire the multitron black/black. yellow to yellow. Red/Green to Red/Green. The other red green/to the gray common on the LED7. I have tried yellow/yellow/red and green. Black/Black/Red and Green as well. Nothing. Intermittently it will allow me to start a wash with coins. Once the wash is going it will not accept coin any more. After that cycle is done, it won't accept coin pulses anymore. Crypto and expressKey work fine.

Totally frustrating. Any assistance from the SS guru's would be much appreciated!

Thank you.

 

[Randy]

I don't think you have it wired right. Here's a link to installation instructions for the LED-7 timer. http://dixmor.com/TIMER PDF/LED7 V7.33 INST.pdf You could also have bad coin acceptor.

 

[MDrost1]

Randy, thanks for the email and reply. I was pulling my hair out. Turns out they wired the meter door wrong. The leads they provide for my coin acceptor were wrong. After much time and rewiring, I isolated the issue and am back in business. Thanks for your help!