I recently took over a self serve car wash that was out of service for a year or so. I’m having an issue with the low pressure tire cleaner and pre soak. When selected I’m not getting any product out.
If I disconnect the solenoid from closing I will get product to come out it just will not work with low pressure.
So far I have verified:
-the lines are clean and clear
-Check valves are working
-Solenoid closes high pressure
- Solenoid for product opens
I’ve attached pictures of how everything is plumbed.
If I disconnect the solenoid from closing I will get product to come out it just will not work with low pressure.
So far I have verified:
-the lines are clean and clear
-Check valves are working
-Solenoid closes high pressure
- Solenoid for product opens
I’ve attached pictures of how everything is plumbed.
