New Pump Stand and Coin Boxes

[slash007]

I am thinking about redoing one of my washes and replacing my coin boxes and pump stand. I have 623 pumps that are getting really old and take up most of my tiny ER. Thinking about using Etowah Valley for the pump stands and his coin boxes that have the coin holder hiding under the main door. Anyone have experience with his pump stand or those coin boxes? Price doesn't seem too bad.

 

[DiamondWash]

I can't comment on Etowah Valley equipment but I did see this new space saving system from D&S Systems looked intresting considering it's small foot print
http://dscarwash.com/wp-content/uploads/2015/09/DS_IQ_Self-Wash.pdf

 

[mac]

The meter boxes from Etowah work fine. I would check eBay for pumping equipment. I saw a 6 bay unit in south FL with all the support stuff for $2,500.

 

[pgrzes]

I have Ginsan Ultimate touch doors and My customers and I both love them! whatever you get make sure you put everything in them and as many function buttons as you can fit for future upgrades. I redid my wash with a used Coleman stand and am getting ready to do another wash and found another nice used Coleman stand. I dont usually like to purchase new when there is so much good used equipment out there.

 

[smallwash]

I have two locations with Etowah valley equipment. 3 bay SS and had Etowah equipment for coming up on 4 years. I like the equipment. Recently purchased 5 more ss bay from them, been up and running three weeks at this new location.

It seems as tho the key to the Etowah meter box timer is proper phasing and grounding.

 

[slash007]

I almost bought a used Coleman stand last year, but it wouldn't fit in my tiny ER. The EW stand was less than half the cost of every other stand that I priced at the show, and it included external meter boxes with safes. Just the shell, as I would reuse my coin and bill acceptors, cryptoypay cc and my Dixmor timers. I thought about going with buttons, but then I would have to use their timer and go count down on Cryptopay, so I would just get the shell and keep my stuff. I would get a 12 button switch for future upgrades and run 15 lines to each bay so the wiring would be there.