I had an OMRON 16 channel input module go out on me (no power light, no comm light) I replaced it with a new one, and now I have a power light, and a COMM light, but none of the prox switches and telco eyes that are hooked up to it are communication with it to show a "coverd/uncovered" status rendering my G2 in-bay automatic useless. I can use a jumper to get each individual channel to light up, but that obviously doesnt help me to see front/end limits, or any safety/sizing eyes. Anybody have some expertice in this to help me understand how these modules work so maybe it will help me when im tracing wires to find a fault anywhere. This is the third day I have been chasing wires, and testing with a meter, with no luck getting it running still. Thanks for your help.
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
problem communicating with OMRON input module on G2 In-Bay Automatic
- Thread starter jbmjbj
- Start date
