What's new
Car Wash Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Quick Disconnect Plug for LW4000 Weep Recommendation?

MDrost1

Member
Folks,

I have an 24v ASCO solenoid on my weep system for a LW4000. I currently have wire nuts on the wires. To power down for the warm season, I disconnect one side of the solenoid. I am looking for a more permanent "quick disconnect" option for the braided wire.

Any links or advice. Much appreciated! Thank you.
 
Am I missing something here's? I'd just put spade terminals on this and use a basic wall switch. Or better yet, just a toggle switch with leads that can be wire nutted to your current leads
 
Nah. I am just looking for suggestions for a reusable, simple disconnect for my 24v solenoid. I hesitate to put a switch in. Just want to keep it simple.
 
As long as nobody but you is going to be plugging/unplugging it, maybe take a cheap extension cord, cut it in half, plug it into itself and wire it inline to the solenoid.
 
Currently, I put spade terminals on today. Do you think these will be fine on a LW4000 pump stand with all of the vibration? They seem to fit nice and tight. Thanks, guys!
 
Back
Top