Our 4 bay has a 2" water supply line that was metered in the E.R. with a 2" meter. At one time our wash had an automatic that required the 2" supply and meter. Although the auto was taken out years ago, they kept the 2" meter in place. With that setup, we were charged for 22K gallons of water and sewage monthly whether we used it or not. We also had to read the meter every month and give the reading to the utilities dept.
Recently the utilities dept. contacted me and told me they were going to replace my meter with one that could be read remotely. I suggested instead of replacing with a 2" meter that they put me in a 1" meter. I had contacted them over a year ago to see if this could be done but was told it couldn't?!?!? But now since it was their idea, its was ok! Even though I had to pay for the installation and new meter, it was pretty much a no brainer since the ROI was 4 months. Making this change will instantly save me about 50% average on my water and sewer bill.
Recently the utilities dept. contacted me and told me they were going to replace my meter with one that could be read remotely. I suggested instead of replacing with a 2" meter that they put me in a 1" meter. I had contacted them over a year ago to see if this could be done but was told it couldn't?!?!? But now since it was their idea, its was ok! Even though I had to pay for the installation and new meter, it was pretty much a no brainer since the ROI was 4 months. Making this change will instantly save me about 50% average on my water and sewer bill.