DiamondWash
Well-known member
I am helping another operator at his wash with his OHD and he is having a really wierd ultrasonic problem here is goes:
Customer pays for a wash that includes the free standing Rocker Panel Blasters and the RPB's activate by the tire running over the air hose not by photoeyes then when the customer is about 3-4 feet from the system the horn sounds "STOP STOP" then goes back to "Drive Forward Slowly" it does this 2-3 times then once the vehicle is under the Rear Ultrasonics the wash begins and it contours the vehicle perfectly even at the rear of the vehicle.
Now for the wierd part of this:
Same customer pays for a wash with "NO" Rocker Panel Blasters included in the package and drives in the same way and no problems, they pull right under the Rear Ultrasonics like they should and the wash begins and contours the vehicle prefectly.
The Rear Ultrasonics are brand new "Transmitter and Reciever" and at a heafty price, it was doing this before we switched them out and I was told from Ryko it had to be a ultrasonic problem. So why would it do it with the rocker panel blaster enabled but not when they are not enabled?
Customer pays for a wash that includes the free standing Rocker Panel Blasters and the RPB's activate by the tire running over the air hose not by photoeyes then when the customer is about 3-4 feet from the system the horn sounds "STOP STOP" then goes back to "Drive Forward Slowly" it does this 2-3 times then once the vehicle is under the Rear Ultrasonics the wash begins and it contours the vehicle perfectly even at the rear of the vehicle.
Now for the wierd part of this:
Same customer pays for a wash with "NO" Rocker Panel Blasters included in the package and drives in the same way and no problems, they pull right under the Rear Ultrasonics like they should and the wash begins and contours the vehicle prefectly.
The Rear Ultrasonics are brand new "Transmitter and Reciever" and at a heafty price, it was doing this before we switched them out and I was told from Ryko it had to be a ultrasonic problem. So why would it do it with the rocker panel blaster enabled but not when they are not enabled?
