Shut down, lost 24v controls on ryko us2001

[mrfixit]

This am no presoak, air was down thought ok.. Got her running and no dice. Can't get any valves to open. When I test them the PLC lights up but I get no valves opening I assume no 24v output or a short..

This is not good... Going to get my meter as I left it at our shop..

If anyone has any ideas let me know, I'll post my findings here later.. Hopefully I get it going soon, nice day.

 

[MGSMN]

Check breakers Q17(120v), Q18(24v), Q13 & Q14(24v). Relay K1 should be energized, if not check the E-Stop button.

 

[mrfixit]

Thanks, you got it.. The emergency stop was holding it up.. After I walked away and came back it came to me instantly. Lol... Thought it may be something more.. But nothing to see here move along.. Lol

Not sure what had happened when it failed after getting the air back up. Ran a car in and had no presoak around the car.. That's when I hit the stop button... Checked a bunch of wires found a couple loose anyway... Got it up and open a little after 10.