UNITEC Portal TI Teller "Coin Dispenser"

[Good Moody]

Good Day, My two year old Teller change dispenser stopped working all of a sudden, I'm going to fully remove it today, Looked at it yesterday but didn't see anything negative, fully emptied it, then refilled it to see how it would react and it's dead. Have any of you experienced this before.
I printed the owners manual and it doesn't provide much info on it.
Thanks!

 

[slash007]

I've had a motor lock up on one. See if it spins. I've also found mine jammed on a few occasions, so hopefully that's it. Take off the part that has circles and holds the coins and make sure nothing got stuck under there that is preventing it from spinning.

 

[Good Moody]

Yesterday I was able to experience that it does spin, Im going to fully disassemble it this afternoon

 

[slash007]

Yesterday I was able to experience that it does spin, Im going to fully disassemble it this afternoon

Should hopefully be easy then. I've found paper and other debris in the way before. Also that round top disk might not be pushed down all the way.