HighOctane
New member
I’ve been thinking about getting a 4000 psi pressure washer and floor scrubber - anyone have any experience with this?
Car Wash Forum
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
What do y’all use to clean your floors?
- Thread starter HighOctane
- Start date
I have a surface spinner that my employee uses. It works well at even lower PSi. 2000-2500 psi is optimum. Be careful with higher pressure, especially on new concrete. I would rather have higher volume than higher pressure. I also treat with 6% bleach after treatment to help with striping and retard future mildew.
Nuphoenix
Active member
I used to just use a 2300psi PW I got from Lowes, but it would take forever to clean a bay. Soaks your boots and pants too. I got the Mosmatic surface cleaner from KR and a new 4000psi 4gpm PW, and I don't have to spend hours cleaning anymore. Together they do a great job on the north side of the bays where green mold appear. For the entrance and exit I use a sweeper attachment to the PW and that cleans my asphalt pretty good.
