I have a 4 bay self serve wash. I have a 5 gallon holding tank that supplies hot water to 4 Cat 310 pumps when in high pressure wash. The tank has two nipples on the bottom (one 1/2" and the other a 3/4"). Both are leading to a 1inch pvc pipe which the 4 pumps come off of with a 1/2" hose. Will that provide enough water to the pumps?
I have the whole setup minus the pumps at home just to experiment to see if it will provide enough water. It only puts out about 12 gallons in a minute but the 1/2" valve I have in the tank will not keep up with the water going out of the tank. A 1/2" valve is supposed to pump out about 20 GPM but it can't keep up.
Comments.....Please!
I have the whole setup minus the pumps at home just to experiment to see if it will provide enough water. It only puts out about 12 gallons in a minute but the 1/2" valve I have in the tank will not keep up with the water going out of the tank. A 1/2" valve is supposed to pump out about 20 GPM but it can't keep up.
Comments.....Please!
