Wheel Prox settings WW 1.0

[wisheewashee]

I am trying to remember where you can get into the Red Lion to tell it how many wheel turns past the back of the vehicle to go. Can anyone help?

I think the factory setting is something like 8 turns. I want it bump it up a little as I have a lot of trucks coming through with oversized hitches.

John

 

[Tom Thumb]

I am pretty sure you will need to go in the service screen ,but you will need to get the password from a service tech.

 

[wtrwzrd]

Go to service screen, press next until you reach screen that reads, for use by servicemen only ( or something like that), then press the delete key. You then will be able to modify counts. I would recomend 8 or higher. If you are having measurement issues, your telco eyes are probaly weak or out of ajustment. Hope this helps.