What's new

Who Uses Powder Presoaks?

Txcarwash

New member
Joined
Mar 10, 2021
Messages
3
Reaction score
0
Points
1
Who uses powder presoaks and what's your experience? Also how do you mix it up?

Thank you.
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
I don't use it, but I have a customer using Red Hot from Scotch Plaid. It's mixed in a basket for the SS and the presoak Hydrominder draws off that, I'm pretty sure with no tip. It cleans really well and foams with air injection without sputtering. I've used Red Hot for bay soap and like it, but I don't have a basket for the tank. It doesn't want to stay suspended properly when mixed in a barrel.
 

Waxman

Super Moderator
Joined
Aug 31, 2007
Messages
6,045
Reaction score
1,684
Points
113
Location
Orange, MA
Simoniz Correct. 50 lb box
foam additive 1.5 gal
simoniz ultra 1.5 gal
55 gal. filled with hot water
 

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
AP Formulators Wash Master is about as strong an IBA PS as you can get.
 

MudMoney

Well-known member
Joined
Sep 13, 2007
Messages
543
Reaction score
255
Points
63
Location
Montana
This thread came @ a good time.. Might have to go to powder presoak. My freight is prepaid by Scotch Plaid Chemical for the last 28 years, now got sold to Sonny's.
 

Waxman

Super Moderator
Joined
Aug 31, 2007
Messages
6,045
Reaction score
1,684
Points
113
Location
Orange, MA

So the AP formulators wash master comes in a 40 pound box but you use 20 pounds per 55 gallon barrel. How do you do this? Mix or measure half a box of powder to make one for 55 gallon drum? I'm assuming it's a high pH powder, correct?
 

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
Wax, it has 2 bags inside the box. Most guys I know use the whole 40lbs for 55 gsllons. But that does make it really stout. However, 20lbs for 55 gsllons is rather weak.
 

rossallen768

New member
Joined
Dec 7, 2022
Messages
15
Reaction score
4
Points
3
Once you mix the wash master. Do you draw straight from the barrel or is it further diluted via a hydrominder? Working on a water wizard that is drawing from the mix barrel to a hydrominder and that doesn't seem correct to me
 
Top