What's new

can you add SFR & NOT add soft water?

soonermajic

Well-known member
Joined
Oct 26, 2014
Messages
3,384
Reaction score
869
Points
113
Location
texas
Can I add SFR for my 5 SS bays & 1 IBA, & NOT add a soft water system in front of it?
 

Eric H

Well-known member
Joined
Aug 30, 2007
Messages
1,297
Reaction score
753
Points
113
Location
Leominster, MA
Before you get too deep into your research...How many grains of hardness is yourwater and what is the TDS?
I don’t have a softener or a RO system. I have very soft water (don’t recall the Grains). And my TDS is between 40-50, mostly because of Magnesium. I would like to get the TDS lower but the results do not justify the cost.

I have considered a de-ionization (DI) system but haven’t done the research.
 

koliver

PDQ Sales Engineer
Joined
Sep 4, 2007
Messages
143
Reaction score
14
Points
18
Location
DePere, WI
As Eric mentioned, how hard is your water? There are companies out there that make a RO System that doesn't require a water softener, however I believe once you get above 25 grains they suggest you use one. Carolina Pride and Pur Clean are companies that I recall making such a system.
 

Jeff_L

Well-known member
Joined
Dec 27, 2007
Messages
1,246
Reaction score
31
Points
48
Location
Missouri
I like my tds to be 20 or less. Anything more I start investigating.
 

MEP001

Well-known member
Joined
Aug 30, 2007
Messages
16,665
Reaction score
3,946
Points
113
Location
Texas
You can add a softener for just the supply to the RO system for a whole lot less than one for the entire wash.
 

slash007

Well-known member
Joined
Jul 8, 2012
Messages
2,478
Reaction score
415
Points
83
Location
Lexington, Ky.
The size of the softener is based on how much water you will run through it. If only using it for the spot free system, you could just buy a small system and run it to the chlorine tank then sf system.
 
Top