OurTown
Well-known member
Made this at our wash and posted it today. Comments welcome.
https://www.youtube.com/watch?v=IfYcWLlfVa8
https://www.youtube.com/watch?v=IfYcWLlfVa8
Super Air Shammee II Promo Video We Made
- Thread starter OurTown
- Start date
MEP001
Well-known member
I've done something similar, planned on doing a video for each function but never got around to it.
[video=youtube_share;YaY4vygsxAQ]https://youtu.be/YaY4vygsxAQ[/video]
I'm curious why you don't have a tire cleaner function.
[video=youtube_share;YaY4vygsxAQ]https://youtu.be/YaY4vygsxAQ[/video]
I'm curious why you don't have a tire cleaner function.
PaulLovesJamie
rural 5 bay SS
I've also had plans to do this for too many years, got started a couple times but never got around to finishing - good for you that you did 
Be interesting to see if you get many hits.
The video quality looks pretty good to me, tell your wife she did a good job holding the ipad still.
Be interesting to see if you get many hits.
The video quality looks pretty good to me, tell your wife she did a good job holding the ipad still.
Car_Wash_Guy
Well-known member
MEP - Is that from a FloJet?
OurTown
Well-known member
We are planning a large remodel and will add tire cleaner, foaming wax and move the presoak over all through a foam gun. If everything goes the way we want the awful flat roof will come off and a pitched roof is going on. Replacing the auto is our main focus though.
MEP001
Well-known member
Yes, 60 PSI chemical, 65 air. Both are adjusted way down on flow with needle valve to get a thicker foam.
Funny thing is I noticed about a week after I made the video that the tire cleaner was much weaker than it should have been because the foot valve in the barrel had gone bad. This is more what it should have looked like:
